Remote Control Descriptions - Carrier Air Conditioner Owner's Manual

REMOTE CONTROL DESCRIPTIONS

Names and Functions of the Buttons
1
ON/OFF BUTTON - If you press this button, the unit
will begin operation. (You can hear receiving
beeps twice.) Press the button again, and opera-
tion stops. (You can hear a receiving beep.) If you
press this button immediately after turning off the
unit, the compressor will not operate for 3 minutes
to prevent overloading.
3
FAN SPEED SELECTOR BUTTON - Press this but-
ton to select the desired fan speed of HIGH, LOW
or AUTO in turn, and the fan will operate at the
selected fan speed. If you select "AUTO", the fan
speed will be controlled by the microcomputer of
the unit.
TIMER
ON OFF
FURN. AUTO
COOL
DRY LOW
C
FAN
F
HIGH
ON/OFF
FAN
MODE SPEED
ON OFF
TEMP.
TIMER TIMER
1. On/Off Button
2. Mode Selector Button
3. Fan Speed Selector Button
4. On Timer Button
5. Temperature Selector Buttons
6. Off Timer Button
2
MODE SELECTOR BUTTON - Press this button to
select the desired mode. In COOL mode, the unit
will run at the normal cooling mode. In DRY mode,
the microcomputer of the unit controls the fan
motor and makes the unit automatically cycle on
and off according to the room temperature. This
enables the moisture to be removed more
efficiently. In FAN mode, only the fan will operate
at the selected fan speed and circulate the room
air. In FURN. mode, the unit will run at the normal
furnace mode. (This is a user-optional function.)
4
ON TIMER BUTTON - When the unit is turned off,
press the ON TIMER button to select the desired
time, in hours, for the unit to turn on.
' S GUIDE - 5
OWNER