1. Manuals
  2. Brands
  3. IQCCTV Manuals
  4. DVR
  5. IQR960D4
  6. User manual

IQCCTV IQR960D4 User Manual

Hd 960h dvr with hdmi output, real time 960h recording and mobile/internet access
Hide thumbs
Table of Contents

Advertisement

Quick Links

HD
960H
HD 960H DVR with HDMI Output,
Real Time 960H Recording
and Mobile/Internet Access
HDMI
HD
Remote
Touch
Resolution
Output
Access
Panel
User Manual
Models:
IQR960D4
IQR960D8
IQR960D16
IQR960D32
Version 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IQR960D4 and is the answer not in the manual?

Questions and answers

Related Manuals for IQCCTV IQR960D4

Summary of Contents for IQCCTV IQR960D4

  • Page 1 960H HD 960H DVR with HDMI Output, Real Time 960H Recording and Mobile/Internet Access HDMI Remote Touch Resolution Output Access Panel User Manual Models: IQR960D4 IQR960D8 IQR960D16 IQR960D32 Version 1...

  • Page 2: Table Of Contents

    Contents Safety Instructions ……………………………………………………………. Chapter 1. DVR Features ………………………………………………..…… 1.1. Features ………………………………………………………. Chapter 2. Overview …………………………………………………………... 2.1. Front Panels ………………………………………………….. 2.1.1. 4/8/16 Channel DVR Front Panel …………………… 2.1.2. 32 Channel DVR Front Panel ……………………….. 2.2. Rear Panels ………………………………………………….. 2.2.1. 4/8 Channel DVR Rear Panel ……………………….. 2.2.2.
  • Page 3 5.3.3.5.1. Back-up File Based on Event …. 5.3.3.5.2. Back-up File Based on Time ….. 5.3.3.5.3. Play Back-up File ……………..5.3.3.6. Log Search ………………………………..5.3.4. Network …………………………………………………. 5.3.4.1. Network Set …………………………………. 5.3.4.2. Mobile Set …………………………………… 5.3.4.3. Router’s Port Forwarding ………………….. 5.3.4.4. Sub Stream …………………………………. 5.3.4.5.
  • Page 4 6.3.3.3. Network Parameters ………………………. 6.3.3.4. System ………………………………………. 6.3.3.5. Advanced …………………………………… 6.3.4. Local Setting …………………………………………… 6.3.5. Logout ………………………………………………….. 6.4. Mobile Viewing Access Instructions ……………………….. Appendices …………………………………………………………………..… Appendix 1. Operation Function Table …………………………. Appendix 2. Alarm Record Setting ……………………………… Appendix 3. Troubleshooting ……………………………………. Appendix 4.

  • Page 5: Safety Instructions

    Safety Instructions 1. Please read the instruction manual carefully before using the equipment. 2. Please make sure to use the PSU supplied with the DVR. 3. All equipment should be placed in an area away from water and moisture. 4. Do not install the DVR near any heat source, such as radiators, that produce heat.

  • Page 6: Chapter 1 Dvr Features

    IQCCTV IQ960DVR User Manual Chapter 1 DVR Features Function Description Double video output: Monitor, VGA virtual output port or HDMI Output. Real time Supports net-viewer and MP live surveillance and also supports zoom monitoring in/out, auto sequence and PIP display.

  • Page 7: Chapter 2 Overview

    IQCCTV IQ960DVR User Manual Chapter 2 Overview 2.1 Front Panels 2.1.1. 4/8/16 Channel DVR Front Panel Item Key title or Indicator Remark Function & Description If the “Green” indicator is on the system is getting Power Indicator power normally. IR Receiver Receives IR signal from Remote Controller When the “Red”...

  • Page 8: Channel Dvr Front Panel

    IQCCTV IQ960DVR User Manual Play/Pause Play record file, Pause record file Rec/Stop Begin record, stop record Menu/ESC Enter into main menu/exit Menu USB PORT 2.1.2. 32 Channel DVR Front Panel Item Key title or Indicator Remark Function & Description If the “Green” indicator is on the system is getting Power Indicator power normally.
  • Page 9 IQCCTV IQ960DVR User Manual Display from CH1 to CH32. Options available are; 4 Channels turning, 9 Channels turning, 16 Channels turning, 24 Channels turning and 32 Channels turning and then come back to single channel turning. Rewind function. Decrease PTZ rotation speed and parameter value.

  • Page 10: Rear Panels

    IQCCTV IQ960DVR User Manual 2.2 Rear Panels 2.2.1. 4/8 Channel DVR Rear Panel Item Physical port Connection method Video input Connect CH1-4 or 1-8 (Virtual) video input device interface Video output Connect monitor output (BNC interface) Audio Input 4/8CH Audio input (RCA interface...

  • Page 11: Channel Dvr Rear Panel

    IQCCTV IQ960DVR User Manual 2.2.2. 16 Channel DVR Rear Panel 10 11 Item Physical port Connection method Connect CH1-8 (Virtual) video input BNC interface Video input (UP) Main video output; (Down) Spot output (BNC interface) Video output 16CH Audio input (RCA interface Audio Input Audio output (RCA interface);...

  • Page 12: Channel Dvr Rear Panel

    IQCCTV IQ960DVR User Manual 2.2.3 32 Channel DVR Rear Panel 6 7 11 Item Physical port Connection method Connect CH1-16 (Virtual) video input BNC interface Video input Connect CH1-16 audio input BNC interface Audio input Video output Connect monitor output(BNC interface)

  • Page 13: 4/8 Channel Remote Controller

    IQCCTV IQ960DVR User Manual 2.3. 4/8 Channel Remote Controller Item Key title Key function Channel select 1-8; Numeric key Numeric key; Clicking numeric “0” allow you switch to output device Multiple display mode Menu Enter into Main menu/Exit ▲ Up arrow key, Volume adjust ▼...

  • Page 14: 16/32 Channel Remote Controller

    IQCCTV IQ960DVR User Manual 2.4. 16/32 Channel Remote Controller Key Function Key Title Press the button to enter into manual record. SEARCH Press the button to enter into record search menu 2×2 Enter into Quad display 3×3 Enter into 9-split display 4×4...

  • Page 15: Mouse Operation

    IQCCTV IQ960DVR User Manual 2.5. Mouse Operation TYPE Function In menu lock mode - Enter into pop-up menu and click any sub menu to go into the Log-in window. In menu unlock mode - Enter into pop-up menu, and then clicking left key to enter into any sub menu directly.

  • Page 16: Chapter 3 Dvr Connection

    IQCCTV IQ960DVR User Manual Chapter 3 DVR Connection 3.1 HDD Installation Caution Please do not Install or take out hard drive when DVR is running. HDD Installation (1) Cut power to the DVR (2) Unscrew the screws and open DVR upper cover carefully (3) Insert the Power Cord and data cable into Pin of hard drive securely (4) Remove the screws on the HDD bracket.

  • Page 17: Chapter 4 Dvr Boot Up

    IQCCTV IQ960DVR User Manual Chapter 4 DVR Boot Up a4: DVR Boot up 4.1 System Initialization After powering the DVR and pressing the Power button on the front panel, you will enter into the system initializing screen shown as below.

  • Page 18: Live Interface

    IQCCTV IQ960DVR User Manual 3. System Configuration In this section the user can set the time, date DST and NTP as shown below. 4. Network Configuration Set the network configuration as shown below. 4.2. Live Interface After finishing setup wizard the system will enter into <Live> screen. The image below shows the 16-split display defaulted by system.
  • Page 19 IQCCTV IQ960DVR User Manual Please Note: When the internal HDD is not connected or an error occurs, the character “H” will appear on the first channel of the live screen and accompany buzzer alarm. If you want to close the buzzer alarm, please enter into [Main menu-Alarm] to set HDD loss and alarm output to “off”.

  • Page 20: Chapter 5 Dvr Menu

    IQCCTV IQ960DVR User Manual Chapter 5 DVR Menu Pop-up Menu After finishing system initialization, click the right key of mouse on the main interface mode to enter into Pop-up Menu. In this menu, the user can change parameter setting and operate the Main Menu, Multi-Pics, PTZ, Auto Cruise, Zoom in/out, Rec.
  • Page 21 IQCCTV IQ960DVR User Manual Live set Display Output Set Privacy Zone Record Parameters Record Schedule Main Stream Record Search Clip Set Record Playback Search Backup Event Search Log search Network Set Sub stream Main Menu Email Set Network Mobile   S et  ...

  • Page 22: Main Menu

    IQCCTV IQ960DVR User Manual Main Menu On <Live> mode, click the [Menu] button on the front panel or Remote controller to enter into the Main menu interface. In Main Menu mode, you can control device management settings, such as Display, Record, Network, Search, System and Advanced setting.

  • Page 23: Output Mode

    IQCCTV IQ960DVR User Manual Click [APPLY] button on the bottom of the sub-menu windows to accept the changes and click the [OK] button when prompted to save. If you want to cancel the modification, click [Exit] button to exit the menu.

  • Page 24: Privacy Zone

    IQCCTV IQ960DVR User Manual Picture 5-4 Click the [Live] button to pop up the interface as shown in Picture 5-5. This allows the user to perform a channel sequence setting. Similarly, Click the [Spot output] option and set relative parameters.

  • Page 25: Record Set

    IQCCTV IQ960DVR User Manual 5.3.2 Record set 5.3.2.1 Record parameters Click [Main menuàRecordàRecord Para] to enter into the interface shown in the image 5-7 below. Ø Channel: Setup the channel desired. Ø Record: Set up the record status. Enable/Disable of each channel Ø...

  • Page 26: Main Stream

    IQCCTV IQ960DVR User Manual Once the desired time schedule has been selected, click the [APPLY] button to save the options. To restore to factory default settings, click the [DEFAULT] button. Please Note: Under the <record> menu and <search> menu, original color stands for no record, “Red”...

  • Page 27: Search

    IQCCTV IQ960DVR User Manual 5.3.3 Search 5.3.3.1 Record Search Click the [Main MenuàSearchàRecord Search] to enter into the interface as shown on the following page. Ø Channel: Select the channel(s) that you desire to search. Ø Date Search: In the Video Search screen, the user can search for all the records in a specific date.

  • Page 28: Time Axis Setup, File Clip, Zoom In/Out

    IQCCTV IQ960DVR User Manual 5.3.3.3 Time Axis setup, file clip and zoom in/out 1) The DVR supports the processing control bar function when playing back record files as shown in Picture 5-12 (Up to 4 CH is available). Click [...

  • Page 29: Event Search

    IQCCTV IQ960DVR User Manual Ø Clip and backup: When one channel is playing-back, the [ ] icon will appear in the [Play control] bar as shown in Picture 5-14. Click the icon to start video clip function, then click it again to end the function.

  • Page 30: File Backup

    IQCCTV IQ960DVR User Manual 5.3.3.5 File Backup 5.3.3.5.1 Back-up File Based on Event In the [File List] mode, to backup records, check the boxes which correspond to the records and click [Backup] button to enter into the below windows. Select USB as backup device and click the [Apply] button and then enter into the window as shown below.

  • Page 31: Back-Up File Based On Time

    IQCCTV IQ960DVR User Manual 5.3.3.5.2 Back-up File Based on Time This functions allows the user to back-up recorded files based on time. Please follow below steps to back up these files. 1. Input the start time and end time on the time edit box 2.

  • Page 32: Log Search

    IQCCTV IQ960DVR User Manual 5.3.3.6 Log Search Go to the [Main menuàSearchàLog] option to enter into the Log search interface as shown below. This menu allows the user to preview the log information searched. Click the [Backup] button to export all the log information.

  • Page 33: Network

    IQCCTV IQ960DVR User Manual 5.3.4 Network 5.3.4.1 Network set Enter the Network by going to [Main menuà Networkà Network] and be presented with the screen below. After selecting network mode, the user can enter details such as DHCP, PPPOE or static allocation.
  • Page 34 IQCCTV IQ960DVR User Manual When selecting the DHCP from the Type A, the router will automatically allocate an IP address for your DVR. After restarting each time, the IP address captured by your DVR may be different. Therefor, port forwarding is required when you visit a remote DVR. To do to this;...
  • Page 35 IQCCTV IQ960DVR User Manual When selecting the PPPoE option from the Type drop down list. The user can input the user name and password provided by ISP and set the Media and HTTP port. To gain access to the DVR remotely via the public network by using the IP address captured after registering a domain name and HTTP port.

  • Page 36: Mobile Set

    IQCCTV IQ960DVR User Manual 5.3.4.2 Mobile Set The IQR DVR range is currently compatible with mobile phones running Android, Windows Mobile and Symbian operating systems. As well as, iPhone and Black berry on 3G networks. To configure, please follow the steps below;...

  • Page 37: Sub Stream

    IQCCTV IQ960DVR User Manual 5.3.4.4 Sub stream Go to [Main menuàNetworkàSub Stream] to enter into the interface shown as Picture 5-32 Ø Video: allow you open or close the sub stream output. If you select “Enable” system will select sub-stream preview and guarantee image quality once network is unstable.

  • Page 38: Ddns Set

    3. User Name: Input a user name registered before applying for a domain name; 4. Password: Input a password you set when registering a user name. 5. Click the apply button and restart the DVR. 6. Once the DVR has restarted enter the domain name (for example, http://iqr960d4.3322.org:8080) to view the DVR remotely.

  • Page 39: System

    IQCCTV IQ960DVR User Manual 5.3.5 System 5.3.5.1 HDD Set Click the [Main menuàDeviceàHDD] to enter into the interface shown as shown in the picture below. When the DVR is connected to a HDD, the system will automatically detect if the HDD is normal or not.

  • Page 40: Ptz Set

    IQCCTV IQ960DVR User Manual 5.3.5.2 PTZ Set Click the [Main MenuàDeviceàPTZ] to enter into the below window, shown below. Firstly, select the channel you desire to control and set PTZ protocol (Pelco-D or Pelco-P). Then select the Baud Rate (1200, 2400, 4800, 9600), Data bit (8, 7, 6, 5), Stop bit (1, 2), Parity Check (None, Odd, Even, Mark, Space), Address Code and Cruise status respectively.

  • Page 41: Users

    IQCCTV IQ960DVR User Manual Click the [DST Setup] button to enter into the below interface shown as Picture 5-40, to configure the DST status and mode. Click the [NTP setup] to enter into the interface shown as Picture 5-41, to enable/disable the NTP function.

  • Page 42: Information

    IQCCTV IQ960DVR User Manual Select one <common user> and click <Apply>. Then enter into the <Authority set> interface as shown below. Only the Admin user is authorized to set common user’s authority. Ø Log Search: Check all the system logs.

  • Page 43: Advanced

    IQCCTV IQ960DVR User Manual 5.3.6 Advanced 5.3.6.1 Motion Click the [Main menuàAlarmàMotion] to enter into the interface as shown below. Ø Channel: Enable/disable the motion function for any channel. Ø Area: Click the [Setup] button to enter into area setup interface.

  • Page 44: Alarm Set

    IQCCTV IQ960DVR User Manual 5.3.6.2 Alarm Set Click the [Main MenuàAlarmàAlarm] to enter into the Alarm menu (Below). This menu allows the user to set alarms based on different statuses. Ø No: Select one desired channel Ø I/O Status: Choose between the following three options – NO (Normal Open), NC (Normal Close) and OFF.

  • Page 45: Maintain

    IQCCTV IQ960DVR User Manual Alarm Type Function Video Sends an alarm when the DVR can’t receive video signal (such as Loss camera damage, broken cables or damaged to the power supply). When an object moves into motion detection area, the alarm will be Motion triggered.

  • Page 46: Event

    IQCCTV IQ960DVR User Manual Ø Load Setting: Load the parameters in the U flash disk to device. After loading successfully, the system will auto restart. Ø Save Setting: Save the parameters of device to a flash disk. Note: 1. Do not take out the USB memory or break the power during the update 2.

  • Page 47: Menu Lock

    IQCCTV IQ960DVR User Manual 5.4. Menu Lock To access the system safety feature, click the [ ] icon to lock the system interface when leaving the DVR. To login to the DVR again, input the device code and password to unlock the interface (as shown below).

  • Page 48: Pip Mode

    IQCCTV IQ960DVR User Manual To set a pre-set point, please see the following steps; 1. Total: Set up pre-set point quantity 2. Cur Point: Indicates the starting point cruised. System default point is 01. The model supports up to 255 pre-set points.

  • Page 49: Manual Record

    IQCCTV IQ960DVR User Manual 5.10 Manual Record To start the manual record function, click [ ] button on the Front panel or Remote controller. Please stop recording manually once manual record is activated. 5.11 Stop record To quickly stop recording, click the icon [ ] or [Stop] button on the front panel or remote controller.

  • Page 50: Chapter 6. Web Application

    IQCCTV IQ960DVR User Manual Chapter 6. Web Application /Mobile Manager 6.1 ActiveX Control Download and Installation Open your web browser and input the IP address and web port of DVR, for example, http://172.18.6.202:8080/. If your computer is connected to Internet, it will download and install “ActiveX”...
  • Page 51 IQCCTV IQ960DVR User Manual Picture 6-1 If running the web application for the first time, the download will take roughly one minute to finish and install the ActiveX controls.

  • Page 52: Web Application Manager Log-In

    IQCCTV IQ960DVR User Manual 6.2 Web Application Manager Log-in After ActiveX controls are installed, please input user name, password and client port. Then select <Main stream> or <sub stream>, and tick-select <Open All Channels Preview>. Now, click the [Log-in] button, to access the DVR remotely and monitor live video images using Web browser.

  • Page 53: Menu Bar

    IQCCTV IQ960DVR User Manual 6.3.1 Menu Bar Menu bar includes [Live], [Replay], [Configuration], [Path Configuration] and [Logout] options. 6.3.1.1 Live Display After running the Web Application Manager on your local PC, the system will be defaulted to enter into <Live> interface. Click the [Play] button to Open/close live images and enter into on-spot record and Capture, quad, 9-split or 16-split mode by operating the control bar on the bottom of screen.

  • Page 54: Ptz Control

    IQCCTV IQ960DVR User Manual 6.3.1.2 PTZ Control ① PTZ moving Direction control: Control PTZ camera’s direction. The middle button allows the user to [Auto-cruise]. ② : PTZ speed control bar ③ : Iris, Focus and Zoom control ④ : Preset setting/clear; Start cruise /stop cruise 6.3.1.3 Video control...

  • Page 55: Playback

    IQCCTV IQ960DVR User Manual 6.3.2 Playback Click the [ ] icon to enter into <playback> menu. 6.3.2.1 Record search To search for a record, select the day you want to check and check the <synchronous Playback> button and the channels that you desire to view. Then, select a record type (Normal record, Alarm record and All) and click <...

  • Page 56: Playback Control

    IQCCTV IQ960DVR User Manual 6.3.2.2 Playback control 6-10. Playback Control Bar Description Description Play Open/close audio Pause Volume adjust Stop Playback control bar (x1/2,1/4,1/8, normal, x2, x4, x8) By frame Stop playing Clip Single channel mode Snapshot Quad mode Download...

  • Page 57: Configuration

    IQCCTV IQ960DVR User Manual Record file download Click the [ ] icon to enter into the below interface. Tick-select the recorded file you want to download and click [Start download] The System will download the recorded file in turn and save to the local PC.

  • Page 58: Record

    IQCCTV IQ960DVR User Manual Privacy zone: Each channel can set up to four privacy zones as shown below. For details on how to set parameters please refer to section 5.3.1.3. To delete one privacy zone, please firstly select one zone and click the <Clear> button, then click <Save> on the right corner.

  • Page 59: Network Parameters

    IQCCTV IQ960DVR User Manual Main Stream: For detailed settings, please refer to DVR local setting (shown as Picture 6-16). This option allows the user to modify the resolution, frame rate, Bit rate and audio of the record channel. 6.3.3.3 Network Parameters Unfold the <Network>...
  • Page 60 IQCCTV IQ960DVR User Manual Picture 6-19 Picture 6-20 Sub stream (shown below): Relative parameters should be consistent with the DVR local settings. Email setting: Click the [Email setting] option to set alarm email configuration parameters (shown below). Please note that the detailed parameters should be consistent with DVR local...
  • Page 61 IQCCTV IQ960DVR User Manual DDNS Setting Once the DDNS has been applied service, the user can enable the <DDNS> function under any one network type mode (Static, DHCP and PPPoE). Once this has been done, the user can remotely visit the DVR through domain name (http://domain name: port No).

  • Page 62: System

    IQCCTV IQ960DVR User Manual 6.3.3.4 System Click the <System> to unfold its sub-options: HDD, PTZ, General and Users. HDD: Allows the user to check the HDD status and overwritten time. Please note that the details in this setting should be consistent with DVR local setting.
  • Page 63 IQCCTV IQ960DVR User Manual General: This options allows the user to check the DVR’s language, video system and also set system time, date format, DST and NTP. Please note that the details in this setting should be consistent with DVR local setting.

  • Page 64: Advanced

    IQCCTV IQ960DVR User Manual Information: Check out device name, number, type, MAC address, software version, IE version and hardware version. 6.3.3.5 Advanced Click the <Advanced> option to unfold its sub-options: Motion, I/O Alarm System update, Load default, Events and system maintain.
  • Page 65 IQCCTV IQ960DVR User Manual Motion Detection: This menu allows the user to configure the <Sensitivity>, <Alarm out>, <Alarm record> and <Alarm Capture> of the DVR. Please note that the details in this setting should be consistent with DVR local setting.
  • Page 66 IQCCTV IQ960DVR User Manual System update: This section allows the user to upgrade DVR system remotely. Please follow below steps to upgrade the system: A. Select the upgrade file’s path as shown below. Please note that the format of upgrade file is *.sw...

  • Page 67: Local Setting

    IQCCTV IQ960DVR User Manual Events: The events section allows the user to configure abnormal type, buzzer output time, alarm email and the message shown in alarm screens. Please note that the details in this setting should be consistent with DVR local setting.

  • Page 68: Logout

    IQCCTV IQ960DVR User Manual 6.3.5 Logout Click the Icon to return back the log-in interface. 6.4. Mobile Viewing Access Instructions The DVR is currently compatible with mobile phones running iPhone and Android operating systems. Below are these Mobile Viewer’s installation procedures.
  • Page 69 IQCCTV IQ960DVR User Manual Add and delete device The device manager will allow the user to add or delete a device and also modify device properties. Tab "Device Manager" on Main Menu to open this interface as below To add a new device, click the [Add] button at the top right, then you can input the device name, address(ip or domain name), port, user name and password.
  • Page 70 IQCCTV IQ960DVR User Manual Open a device Tab the button to open device list as below, then select one of devices in the list. This will open all channels automatically. Open a channel Tab the Cross button on one of the view windows to enter the channel list window. After, select...
  • Page 71 IQCCTV IQ960DVR User Manual 1. Select one channel: Select the channel button to open device list, and then select the desired channel of device in the list. 2. Select date: When you have selected channel, all the dates with recorded files will be marked with a dot.
  • Page 72 IQCCTV IQ960DVR User Manual Android: 1) Connect your Android phone to the internet using 3G or WIFI 2) Download and install the free IQCMS app from the Google Play Store. 3) After finishing installation, the [IQCMS] icon will be displayed to phone interface shown as Picture 2 4) Tab the IQCMS icon to open the app.
  • Page 73 IQCCTV IQ960DVR User Manual To add a new device, click "Add" button at the top right, then you can input the device name, Login address (ip or domain name), Media port, user name and password etc. The Channels property can be retrieved form device.
  • Page 74 IQCCTV IQ960DVR User Manual Recording streaming The user can record streaming when viewing the live video. Tap the button and then tap the channel label on the bottom panel to start recording. Please note that only the channels that are viewing can be recorded. Recording will stop if you close the channel or leave live page.
  • Page 75 IQCCTV IQ960DVR User Manual PTZ control Tap the button to open PTZ mode and bring up the PTZ control buttons at the bottom of live page. To control the camera, maximize a camera window and open PTZ mode. Tab the arrows on the side of camera window to control camera move side to side or up and down.

  • Page 76: Appendices

    IQCCTV IQ960DVR User Manual Appendices Appendix 1. Operation Function Table Type Title Description Time setting Set system date/time, display format and day-light saving time Language select Set system language Set CH title and position; adjust image colour Channel setting parameter value; set CH display to ON / Off and time display/recording time overlaying to On/Off.
  • Page 77 IQCCTV IQ960DVR User Manual Remote Set local CH display, record, alarm, PTZ control parameter set of parameter value via network Network download Backup record file via network System info Check device ID, software version and MAC address Auxiliary In addition to illustrating pictures. Generally indicate function optional parameter value of previous menu.

  • Page 78: Appendix 2. Alarm Record Setting

    IQCCTV IQ960DVR User Manual Appendix 2. Alarm Record Setting Under the record mode, [ ] icon or [ ] icon will appear on the screen, and an alarm will be issued. If the user has configured the record type to <Normal> on the <Scheduled> mode, once one alarm has occurred, the record will be saved as Normal record.

  • Page 79: Appendix 3. Troubleshooting

    IQCCTV IQ960DVR User Manual Appendix 3. Troubleshooting 1. Q: What can I do if the system does not detect the HDD? A: Check if the power supply system is properly connected and data cord and power cables are securely connected.

  • Page 80: Appendix 4. Usage Maintenance

    IQCCTV IQ960DVR User Manual Appendix 4. Usage Maintenance To maximize the use of your new DVR, please follow the steps below; 1. Close the [OFF] button on the front panel to avoid losing data. 2. Make sure DVR is kept away from heating source.

  • Page 81: Appendix 5. Accessories

    IQCCTV IQ960DVR User Manual Appendix 5. Accessories 4/8 Channel Accessories User Manual 1x DVR Power Supply 1x USB Mouse 1x Remote Control Software CD 16/32 Channel Accessories User Manual 1x DVR Power Supply 1x USB Mouse 1x Remote Control Software CD...
  • Page 82 (including accidental damage) and damage caused by normal wear and tear. In the unlikely event that you encounter a problem with this product, it should be returned to the place of purchase. IQCCTV, Unit 2 Valley Point, Beddington Farm Road, Croydon, Surrey CR0 4WP www.iqcctv.co.uk...

This manual is also suitable for:

Iqr960d8Iqr960d16Iqr960d32

Table of Contents