Advertisement
Quick Links
UK
Subject to change
Document Ref:
FLZ-275/18772/PMR28/Issue 1/April 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com
Ferm Band Saw
FLZ-275
0210/24
USER'S MANUAL
Art.nr. 730762
Screwfix Art.nr. 18772
Advertisement
Related Manuals for Ferm FLZ-275
Summary of Contents for Ferm FLZ-275
- Page 1 Subject to change USER’S MANUAL Document Ref: FLZ-275/18772/PMR28/Issue 1/April 02 Copyright © These instructions are the sole property of Ferm-Omega Tools and may not be reproduced Ferm Band Saw FLZ-275 Art.nr. 730762 Screwfix Art.nr. 18772 Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com...
-
Page 2: Safety Instructions
PRODUCT INFORMATION manual and the enclosed documentation with the machine. Ferm products are manufactured to high quality standards, they are safe and fit for purpose at time of sale, but all tools can be dangerous if the correct precautions are not taken. - Page 3 Warning! This machine can produce fine dust, switch. Check that the switch is off before plugging in to REF NR DESCRIPTION FERM NR which is harmful to your health – always wear a sui- socket. table dust mask and other protection equipment as approp- CAPACITOR (8 µF)
- Page 4 • If it isn’t square, from under the table loosen the adjusting screw lock nut. Loosen the clamp (B) then adjust the table angle by turning the table adjusting Ferm Ferm...
- Page 5 Refer to Fig 8 above. bearing. way: Refer to parts illustration and Figs 5/8 below. • Open the band saw cover unscrewing the bolts Take to your Ferm dealer for repair. BLUE • Neutral When changing blades make sure that the blade slot, •...
-
Page 6: Using The Saw
The blade cuts on a continuously downward • The carbon brushes are worn; take to your Ferm SELECTING SAW BLADES To fit and adjust the mitre guide stroke.
Need help?
Do you have a question about the FLZ-275 and is the answer not in the manual?
Questions and answers