Advertisement
Quick Links
UK
Subject to change
Document Ref:
FFZ-40N/11503/PMR25/Issue 1/April 02
Copyright ©
These instructions are the sole property of Ferm-Omega Tools and may not be reproduced
Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com
Ferm Scroll Saw
FFZ-400N
0210/25
USER'S MANUAL
Art.nr. 726290
Screwfix Art.nr. 11503
Advertisement
Related Manuals for Ferm FFZ-400N
Summary of Contents for Ferm FFZ-400N
- Page 1 Subject to change USER’S MANUAL Document Ref: FFZ-40N/11503/PMR25/Issue 1/April 02 Copyright © These instructions are the sole property of Ferm-Omega Tools and may not be reproduced Ferm Scroll Saw FFZ-400N Art.nr. 726290 Screwfix Art.nr. 11503 Ferm BV • P.O. Box 134 • 8280 AC Genemuiden • NL • www.ferm.com...
-
Page 2: Safety Instructions
| 62.6 dB(A) Lpa (sound pressure) w/o load | 66.4 dB(A) Ferm products are manufactured to high quality stan- dards they are safe and fit for purpose at time of sale, but all tools can be dangerous if the correct precautions are PRODUCT INFORMATION not taken. - Page 3 SPARE PARTS LIST FFZ-400N OPERATIONAL SAFETY Avoid unintentional starting Do not carry plugged in tools with your finger on the Warning! switch. Check that the switch is off before plugging in to REF NR DESCRIPTION FERM NR This machine can produce fine dust, which is harm- socket.
-
Page 4: Before Using The Saw
Return the clear safety shield to its operating position and adjust the dust blower nozzle. Installing the cross guide/fence The guide (3) acts as a fence and bevel guide. • Slide the guide into the dovetail on the saw table as illustrated below. Ferm Ferm... - Page 5 For any questions relating to operational or safety Ensure the small lugs on the adaptor barrel facing matters contact: inwards towards the middle of the blade; these lugs Ferm Customer Helpline on: 0115 966 1199 locate in the depressions on the blade holders. Monday-Friday 8am –...
-
Page 6: Using The Saw
• Damaged/faulty plug. If the plug needs replacing follow these instructions. rupted or disconnected. Switch or power lead, take to your Ferm dealer for repair. Wire correctly The wires in the mains lead are coloured in the following The saw wanders off the cut line way: •...
Need help?
Do you have a question about the FFZ-400N and is the answer not in the manual?
Questions and answers