Hitachi 32PD3000E Service Manual page 75

Hide thumbs Also See for 32PD3000E:
Table of Contents

Advertisement

No ITEM
POTENTIAL PROBLEM/QUESTION
1
CVBS &
CVBS and S-VHS input is softer than
S.INPUT
CL32PD2100 (with NR=off).
SOFTER
When DVD signal input through AV1, Front by
CVBS or S-VHS, picture is soft.
2
BLACK LEVEL
CVBS and S-output from DVD player has set up
BRIGHT (Black
voltage of black level around 0.1V.
level set- up)
This causes black brighter and loose contrast.
This was found with DVD player DV P305 with
Spanish DVD disc. I have never found the same
phenomenon in any other places so far. In HEL, I
have checked DV P305 with UK DVD disc and
confirmed OK (no set up voltage) In Italy, this
was not found with DVD player DV P250 with
Italy DVD disc. CVBS and S-input
from DVD
3
LTI EFFECT
PICTURE > MORE > LTI
Luminance
LTI effect is not significant in CVBS and S-
Transient
INPUT but very significant on RGB and
Improvement
component input.
4
NOISE
PICTURE > MORE > YNR
REDUCTION
PICTURE > MORE > CNR
Noise reduction effect is not as strong as
EFFECT
CL32PD2100. CL32PD2100 is too strong to give
crisp picture. Instead, there are 2 types Noise
79
CAUSE and COUNTERMEASURE/ADVICE
CAUSE ;
DVD output signal includes noise equivalent to picture
frequency.
CL32PD2100 displays a picture more detail with NR=off
than 32PD3000 but DVD noise is also emphasized especially
seeing sky, you can see dot noise on
CL32PD2100.
32PD3000 is filtered noise so you cannot see noise but a
picture is also becoming softer.
ADVICE;
CVBS and S-input is not good for demonstration. Because
almost all DVD has RGB, please use RGB for demo or
YCbCr/YpbPr instead (new feature) RGB input of 32PD3000
is more crisp and less noise than CL32PD2100.
The set up black level is not expected on PAL signal. So
something wrong probably when DVD disc is copied in
Spanish DVD software company. Or Some DVD player may
have potential cause of this problem. But it is recommended
that the demonstration should be done by RGB or component
input to avoid this phenomenon. Almost all DVD players
have RGB output.
CL32PD2100 has LTI but it is so strong that noise is also
emphasised very much. On 32PD3000, this is improved to
effect clear signal avoiding noise enhancement.
Sometime on TV, noise appears close to colour frequency.
By previous noise reduction, when this noise is reduced by
NR feature, it affect luminance causing loose of picture
sharpness. CNR only reduce this noise without affecting
picture sharpness.
NOTE
This is observed only
in Spain.
This is caused by DVD
player option. DV
P305 has menu option
to switch SET UP >
DISPLAY OPTION >
BLACK LEVEL =
On/Off. When it is set
to On, the signal on left
hand drawing is output
from DVD.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

42pd3000e

Table of Contents