Wiring For Audio / Video Components - Hitachi 32PD3000E Service Manual

Wiring for Audio / Video Components

Lead clamper for EFP1, EFP2,
ESC and EARTH should be locked
after fixing EARTH and looped
EFP1, EFP2 and ESC wires.
EFP1, EFP2, ESC and
EARTH should never be
bunched together with ZSC
(Nittoh adhesive tape No.188
L=50mm)
10
150
Specification
1. This Drawing shows the wire dressing and connectors' connection of
AVC3-E Final Assy.
2. Connectors with wire should be inserted into Plug Pin Posts as
shown on the table below
Connector with wire
Name Assy List
ESC FINAL ASSY
EFP1 FINAL ASSY
EFP2 FINAL ASSY
ESF FINAL ASSY
PSP Power Board Assy
3. Into Plug Pin Post with Lock function, connector housing should be
inserted deeply until it can be locked.
4. Into Plug Pin Post without Lock function, connector housing should be
inserted most deeply.
5. Flexible Flat Cable ESF should be fixed as shown on the drawing below
position
10
32PD3000 / 42PD3000
Plug Pin 1 Plug Pin 2
Board Name Board Name
Control Board PSC AV Board PL702
Power Board PFP1 HCP111 P002P
Power Board PFP2 HCP111 P003P
AV Board PSF HCP111 P001
AV Board PSP - -
and lock
59