Miele PT 7251 Operating Instructions Manual page 25

Drive motor fault
m
Motor overheating.
Press the start button to continue.
^ Allow the motor to cool down.
Power cut
y
Programme stop
Press the start button.
^ The programme can be continued by
pressing the h "Start" button.
Heating system fault
§
Programme stopped. Press the start button.
Programme will run without heating
^ To continue the programme without
heating press the h "Start" button.
Call the Service Department.
Heating system fault
§
Call the Service Department
if restart does not work.
^ Call the Service Department.
Pressure monitor fault
§
Call the Service Department
if restart does not work
^ If the programme still will not start please
call the Service Department.
M.-Nr. 06 533 441
Gas system fault
§
Call the Service Department
if restart does not work.
f
If this message appears after a programme
has been started:
^ Open the gas tap and then press the "h
Start" button.
If this message appears during a
programme the pressure in the gas supply
has dropped because of other gas heated
f
appliances operating at the same time.
^ Press the h "Start" button.
^ If the programme still will not start please
call the Service Department.
Card fault
§
Card incorrectly inserted in card reader.
f
Continue: Press start
^ Insert the card the right way round in the
card reader.
f
f
Problem solving guide
f
f
25