Miele PT 7251 Operating Instructions Manual page 14

Drying
If you wish to make alterations before the
start of the programme, e.g. to the load
size, temperature or residual moisture:
^ Confirm the selection of the programme by
pressing the rotary selector.
The following (example) will appear in the
display:
2 Cottons dry
0 % Drying
Cooling down
The max. load will be shown at the far right
of the display.
Load weight
You can enter the weight of the load
manually before the start of the programme.
2 Cottons dry
0 % Drying
Cooling down
^ Turn the rotary dial to highlight the load.
Press the dial to confirm your selection.
Turn the dial to alter the weight and
confirm your selection by pressing it.
Temperature in 1 °C increments from cold,
30 to max. 80 °C .
^ Turn the rotary dial to select the
"Temperature" field (70 °C for drying) and
press it to confirm your selection.
2 Cottons dry
0 % Drying
Cooling down
^ Turn the rotary dial to alter the temperature
value and then press it to confirm your
selection.
Residual moisture in
1 % increments from -4 to 40 % .
^ Turn the rotary dial to select the "Residual
moisture" field (0 %) and press it to confirm
your selection.
14
10.0 / 10.0 kg
70°C
e
m A
10,0 10.0 kg
70°C
e
m A
10.0 kg
70°C
e
m A
2 Cottons dry
0 % Drying
Cooling down
^ Turn the rotary dial to alter the residual
moisture level and then press it to confirm
your selection.
^ Press the Start button h and the
programme selected will commence
Once a programme has started the
programme sequence will appear in the
display.
2 Cottons dry
0 % Drying
Cooling down
In the 2nd line of the display, drying in this
example, the actual residual moisture level
(>40%) will also be shown. The 3rd line
displays the following programme block.
The time that the programme will finish
(12:35) is shown on the right hand side of
the display.
The programme end display has a
self-learning function and will not show an
accurate reading until the programme has
been run several times.
10.0 kg
70°C
m A
>40 %
Ready at 12:35
m K f
M.-Nr. 06 533 441