Auxiliary Input Display Setting - Kenwood KDC-MPV622H3 Instruction Manual

5
Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button
"D" [3]
"A" [2]
"N" [6]
"C" [2]
"E" [3]
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
• Memory numbers
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
- FM: 32stations
- AM: 16 stations
- Internal CD player: 30 discs
• The title of station/CD can be changed by the same operation
used to name it.
Times pressed
1
1
2
3
2
— 13 —

Auxiliary Input Display Setting

Selecting the display when this device is switched to Auxiliary
input source.
1
Select Auxiliary input source
Press the [SRC] button.
Select the "AUX1" display.
2
Enter Auxiliary input display setting mode
Press the [DISP] button for at least 2 seconds.
The presently selected AUX Name is blinks.
3
Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches through the below
displays.
• "AUX1"
• "TV"
• "VIDEO"
• "GAME"
• "PORTABLE"
• "DVD"
4
Exit Auxiliary input display setting mode
Press the [DISP] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.