Speaker Setting; Non-Fading (Sub Woofer) Output - Kenwood KDC-MPV622H3 Instruction Manual

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting
the speaker type.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Speaker Setting mode
Press the [System Q] button.
3
Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type
OFF
For 5 & 4 in. speaker
For 6 & 6x9 in. speaker
For the OEM speaker
4
Exit Speaker Setting mode
Press the [System Q] button.

Non-fading (Sub woofer) Output

Turning the Non-fading (Sub woofer) output ON or OFF.
Press the [NF] button for at least 1 second.
Each time the button is pressed Non-fading (Sub woofer) output
switches ON or OFF.
When it's ON, "NF ON" is displayed.
When the <Switching preout> (page 25) is "SWPRE Rear", this
function is not available.
Display
"SP OFF"
"SP 5/4Inch"
"SP 6*9/6Inch"
"SP O.E.M."
— 11 —