Using Convenient Functions; Using Multiple Microphones - Yamaha YVC-1000 User Manual

This section describes convenient functions provided by the product.

Using multiple microphones

Up to five microphones, including the supplied microphone and optional microphone (YVC-MIC1000EX), can be
connected to the product. When using the product in a layout or a multi-participant conference that cannot be covered
by only one microphone, use multiple microphones to extend the area where sounds can be picked up.
■
Installation
Place all microphones 1 m to 20 m (3.3 ft to 66 ft) away from the Control Unit.
The following figure shows an example of five microphones installed in a line.
At least 1 m
(3.3 ft)
Note
If the Control Unit is too close to microphones, it may cause an echo phenomenon on the other side.
■
Connection
Connect multiple microphones using microphone cables.
1
1
Connect the second microphone to
the first microphone.
2
If necessary, connect the third
microphone and the subsequent
ones with each other.
23

Using Convenient Functions

Max. 20 m (66 ft)
Match the
color labels.
1
Note
When connecting microphones, be sure to match the
color label of each microphone cable with that of the
microphone output terminal (OUT).
Plug into an
outlet