Connecting To A Video Conference System Using Audio Cables - Yamaha YVC-1000 User Manual

Connecting to a video conference system using audio cables

■
Before connecting, check the following.
Prepare two audio cables (stereo RCA pin plug) for input and output.
y
The video conference system may provide different shapes of audio input and output terminals depending on the model. Use
audio cables with the plug shapes that match the shapes of the audio input and output terminals for you video conference
system. The product must be connected to a stereo RCA pin plug regardless of the type of the plug to be connected to the
video conference system.
■
Connection
Connect the product to the video conference system using audio cables.
Before connecting them, set the product to the standby mode.
Plug into an
outlet
Connect to the
microphone
■
Changing settings for the video conference system
Change the sound input/output settings so that the product is used as a microphone and speaker of the video conference
system.
Note
Be sure to disable the microphone and speaker on the video conference system side.
■
Adjusting the microphone sensitivity
Sound may crack or become faint on the other side depending on your environment. In this case, connect a PC or a
Mac to the product, and adjust the microphone sensitivity.
For details, refer to "Connecting to a PC using the USB cable" (pages 12 to 15) or "Connecting to a Mac using the
USB cable" (pages 16 to 18).
y
The microphone sensitivity setting is saved in the product, so it is not necessary to keep the PC or Mac connected after the
setting has been completed.
Audio output
terminal
Audio input
terminal
Video conference
system
22