Status Setting; Graphic Display Selection - Kenwood eXcelon KDC-X991 Instruction Manual

5
Select the Display Mode
Turn the Control knob.
Select from the following display mode:
Mode "TYPE SELECT [B]"
B-1/
9
2
C-1
3
3
B-2/
9
4
C-2
5
5
5
B-3/
9
6
C-3
6
Exit Display Mode Selection mode
Press the Control knob.
⁄
• 1, 2, 3, 4, 5, 6, 7, 8 Text display part
9 Status display
0 Icon display part
! Graphic display part
@ G-Analyzer display part
• To change the information by the Display Type, refer
to the page on the following table for the methods to
alternate by the Display Type.
Display Type A B-1 B-2 B-3 C-1 C-2 C-3 D
Text 1
18 — 18 — — 18 — — —
Text 3
— 18 — — 18 — — — —
Text 4
— — 18 — — 18 — — —
Text 5
— — 18 — — 18 — — —
Text 6
— — — 18 — — 18 — —
Text 7
— — — — — — — 18 —
Status 9
17 — — — — — — — —
Icon 0
— — — — 20 20 20 — —
Graphic !
17 — — — — — — — —
G-Analyzer @
— — — — — — — — 20
• With Display type D, text is displayed between the top
and bottom rows when blank is set in the top or bottom
row.
• For the Satellite radio source, the text display part 6 is
divided between top row and bottom low for B-3 mode
or C-3 display mode.
• Text display part 6
If whole information cannot be displayed within four
rows, hold down on [FM] of the Control knob for at
least 1 second to display the remaining portion of the
information.
"TYPE SELECT [C]"
9
0 2
3
3
9
0 4
5
5
5
9
0 6
E
Display Type A

Status Setting

Determine whether the On and Off statuses of
various functions are to be displayed on the Display
Type A.
1
Enter Status Setting mode
Using the Control knob, select "DISPLAY" >
"STATUS".
For the operation method, refer to <Function
Control mode> (page 11).
2
Select the Status display
Turn the Control knob.
3
Exit Status Setting mode
Press the Control knob.
Display Type A

Graphic Display Selection

Changing the graphic Display.
1
Enter Graphic Display Selection mode
Using the Control knob, select "DISPLAY" >
"GRAPHIC".
For the operation method, refer to <Function
Control mode> (page 11).
2
Select the graphic display
Turn the Control knob or push it towards left
or right.
Select from the following displays:
Graphic display
Movie 1 – 2
Spectrum analyzer 1 – 8
Wallpaper 1 – 12
Downloaded Wallpaper*
Wallpaper scan
* For Download Wall Paper, refer to <Picture downloading>
(page 52).
3
Exit Graphic Display Selection mode
Press the Control knob.
⁄
• During standby, Spectrum analyzer cannot be selected.
Display
"SCAN"
17
|
English