Status Setting; Graphic Display Selection; Text Display Selection - Kenwood KDC-X9006U Instruction Manual

• With Display type D, text is displayed between the top
and bottom rows when blank is set in the top or bottom
row.
• Text display part 6
If whole information cannot be displayed within four
rows, hold down on [FM] of the Control knob for at
least 1 second to display the remaining portion of the
information.
Display Type A

Status Setting

Determine whether the On and Off statuses of
various functions are to be displayed on the Display
Type A.
1
Enter Status Setting mode
Using the Control knob, select "DISPLAY" >
"STATUS".
For the operation method, refer to <Function
Control mode> (page 9).
2
Select the Status display
Turn the Control knob.
3
Exit Status Setting mode
Press the Control knob.
Display Type A

Graphic Display Selection

Changing the graphic Display.
1
Enter Graphic Display Selection mode
Using the Control knob, select "DISPLAY" >
"GRAPHIC".
For the operation method, refer to <Function
Control mode> (page 9).
2
Select the graphic display
Turn the Control knob or push it towards left
or right.
Select from the following displays:
Graphic display
Movie 1 – 2
Spectrum analyzer 1 – 8
Wallpaper 1 – 12
Downloaded Wallpaper*
Wallpaper scan
* For Download Wall Paper, refer to <Picture downloading>
(page 36).
3
Exit Graphic Display Selection mode
Press the Control knob.
⁄
• During standby, Spectrum analyzer cannot be selected.

Text Display Selection

Changing the text display.
1
Enter Text Display Selection mode
Using the Control knob, select "DISPLAY" >
"TEXT".
For the operation method, refer to <Function
Control mode> (page 9).
2
Select the text
Turn the Control knob or push it towards left
or right.
See <The text display> (page 16).
Select the row (only for display type with
multiple rows)
Push the Control knob towards up or down.
The cursor (‰) moves to the selected text display
part.
3
Exit Text Display Selection mode
Press the Control knob.
⁄
• When LX-AMP is connected, the item setup by the
• When the music number exceeds 1000, only the last 3
• Music title, Artist name, and Album name cannot be
• When playing music from iPod or music edited by "Music
• Same information cannot be displayed in text display
Display
• If the selected display item does not have any
"SCAN"
Display mode of LX-AMP is displayed. (Other than B-3 or
C-3 display mode)
digits of its number are displayed.
displayed in WAV file.
Editor", the folder name display may show something
different such as playlist or artist name depending on
the music selection procedure.
part. However, the blank display is able to have multiple
selections.
information, alternative information is displayed. May be
blank depending on the displayed row.
|
English
15