Table of Contents
Advertisement
To check or change the programmed tracks
1
Press the CHECK key.
CHECK
2
Select the new track No.
3
Set the entry.
To add a track to the program
1
Select the desired track No.
2
Press the P .MODE key.
To clear tracks from the program
Press to clear tracks from the end.
To clear all track.
Press until the track No. to
be changed is displayed.
1
2
3
4
5
6
7
8
9
+
0
10
P.MODE
1
2
3
4
5
6
7
8
9
+
0
10
CLEAR
P.MODE
Auto space function
During programming of tracks, a non-recorded space of a few
seconds will be automatically created between tracks. By recording
tracks with these spaces on tape, the search and repeat play
operations of tape using the DPSS function (which works by
searching the non-recorded spaces) can be performed reliably.
÷ Even when the performances of two tracks are continuous (which
occurs with classical or live recording music), the spaces will be
created if they have different track numbers.
Lights up.
TRACK
NO.
PGM
0 6
÷ Perform only step 1 to simply check the program.
÷ Each time the key is pressed, the program No. (P-No.) and the track No.
on CD are displayed.
÷ The previous display resumes in a few seconds.
÷ Press it while the "P.C." indicator is lit.
÷ The track being played cannot be changed.
÷ When a track No. is selected, the track will be added to the end of the
existing program.
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
÷ Selected tracks can be also completely cleared just by operating the 0
key.
÷ The entire program is cleared.
DPF-3010/2010/1010 (En)
3
6
P.C.
P _ 0 2
15
Hide quick links:
Advertisement
Table of Contents
