Operation Of Remote Control Unit - Kenwood DP-4090 Instruction Manual

Operation of remote control unit

DISC SELECTOR
RANDOM
1 2 3
REPEAT
4 5 DISC SKIP
1
P.MODE
1 2 3
TIME
DISPLAY
4 5 6
EDIT 7 8 9
TEXT
DISPLAY
CHECK 0 +10
2
7 6
CLEAR ALL INFO.
TITLE
4 ¢
SEARCH
OUTPUT
1 ¡
DOWN UP
3
REMOTE CONTROL UNIT
RC-P0505
Loading batteries
1 Remove the cover.
Operation
After plugging in the power cord, press the POWER switch
of the main unit to turn the power ON. When the power is
turned ON, press the key of the function to be operated.
÷ When pressing more than one remote control key successively,
press the keys securely by leaving an interval of 1 second or more
between keys.
1. The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries.
2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones.
Notes Notes
3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor.
In such a case, change the system installation position to prevent the malfunction.
The keys with the same name as those on the main unit operate the same way as the main unit.
The keys marked * are provided only on the remote control unit.
1 Program-related and other keys
* RANDOM key
* REPEAT key
* P.MODE key
* TIME DISPLAY key
* EDIT key
4
* CHECK key
* CLEAR key
2 Selector keys relating to text informa-
tion
5
TEXT DISPLAY key
* ALL INFO. key
* TITLE SEARCH key
Model: RC-P0505
Infrared ray system
2 Insert batteries.
1
÷ Insert two AA-size (R6) batteries as
indicated by the polarity marking.
*3 OUTPUT (DOWN, UP) key
&
^
*4 Numeric keys ( 1 1 1 1 1 ~ 0 0 0 0 0 ,
$
#
5 Basic function keys
*
Stop key (7)
%(
Play/Pause key (6)
%(
Skip (4,¢) keys
Search keys (1,¡)
#
#
@
3 Close the cover.
2
30 30
REMOTE CONTROL UNIT
RC-P0505
DP-5090/4090 (En)
5
!
)
+10
0
0
!
!
2
1
Remote control
light sensor
6m
Operating range
(Approx.)
9