To Change Or Delete A Title Name - Kenwood CD-2280M Instruction Manual

22
Preparation
÷ Close the door panel.

To change or delete a title name

1
Perform steps 1 and 2-1 of "Assigning Title
Names".
2
Change or delete characters one by one.
1 Select overwrite or insert mode.
Change
2 Move the cursor to the desired char-
acter (to be changed).
3 Select a character.
Press until the character to be entered
comes to the position of the flashing
cursor.
4 Set the selected character.
1 Move the cursor to the desired char-
Deletion
acter (to be deleted).
2 Press the DELETE key.
0
)¡
£
INSERT
1 ¡
CURSOR
L R
CHARACTER/SEARCH
4 ¢
DOWN UP
SET
1 ¡
CURSOR
L R
DELETE/
CLEAR
: Keys and controls used in the operations described on this page.
÷ Call the disc title or track title to be changed.
÷ Deletion mode is cancelled when the MODE key is pressed.
DISPLAY-A
S O N E B O D
+ Move with the 1 ¡ keys =
÷ If the title to be changed is too long to be displayed on the display
section, press the 1 or ¡ key to scroll the display so that the
characters hidden until then appear.
S O N E B O D
÷ The characters also can be selected with the DISC SKIP knob on the
main unit (provided that the OPERATION-A indicator is lit). Turn the
knob until the character to be entered comes to the position of the
flashing cursor.
÷ When a title name is to be deleted, delete all characters one by one.
Registration of Title Name
CD-2280M/DPF-J9010 (En)
= >
Z B A C
Y C T
= >
Y C T L N M O
Flashing cursor