Registration Of Title Name; Assigning Title Names - Kenwood CD-2280M Instruction Manual

Registration of Title Name

For discs not corresponding to CD-TEXT, a title name can
be given to the disc (max. 25 characters). Up to 20 tracks
20
titles can be registered per disc. Operation is possible also
when the door panel is open. It is convenient to register
titles while discs are being inserted.
÷ Load discs into the carousel.
Preparation
÷ Check that the Mechanism-A is in the normal
play TRACK mode.
÷ Set the Mechanism-A to stop mode.

Assigning Title Names

1
Switch to title name input mode.
1 Press the MODE key.
2 Select "TITLE INPUT".
2
Enter the title names.
To enter the disc title
1 Select the disc number.
Previous disc
2 Select a character.
Press until the character to be entered
comes to the position of the flashing
cursor.
3 Press the SET key.
4 Store the disc title.
MODE
∞ DISC SKIP 5
SET
\
∞ DISC SKIP 5
SET
\
Next disc
CHARACTER/SEARCH
4 ¢
DOWN UP
SET
ENTER
0
#
: Keys and controls used in the operations described on this page.
÷ When the MODE key is pressed during title name input mode, the input
mode is cancelled.
DISPLAY-A : The display flashes.
T I
D -
÷ To enter track titles without assigning the disc title, go to "To enter the
track title".
÷ The disc number can be selected directly by using the numeric keys in
place of the DISC SKIP keys.
÷ During playback, the disc only being played can be selected.
÷ The characters also can be selected with the DISC SKIP knob on the
main unit (provided that the OPERATION-A indicator is lit). Turn the
knob until the character to be entered comes to the position of the
flashing cursor.
For direct selection of characters
Example
ABC
÷ When the SET key is pressed, one character is set and the cursor
goes to the next digit.
÷ Repeat this to enter the title name.
÷ One character is set and the cursor goes to the next digit.
÷ Input the entire disc title by repeating 2 and 3 for each character.
T I
÷ To register the disc names of another disc, repeat the entire procedure
of "To enter the disc title".
÷ To register another track titles in the same disc, go to step 1-2 in "To
enter the track title".
Registration of Title Name
T L E I I N P U T
- - C T - - S L E
= >
Each press switches the modes as
follows:
When capital letters have been selected
2
When small letters have been selected
When numbers/symbols have been selected
To change the character type...
T L E I S T O R E
CD-2280M/DPF-J9010 (En)
N D M O
E T C
¡
Z B A C
Flashing cursor
: A B C A .....
: a b c a .....
: 2
£
! ! O M
¡