Preset Memory; Preset Tuning - Kenwood eXcelon KDC-X792 Instruction Manual

Preset Memory

Putting the channel in the memory.
1
Select the channel to put in the memory
Push the Control knob towards right or left.
2
Enter Preset Memory mode
Select "P.MEM".
For how to select Function Control item, refer to
<Function Control> (page 6).
3
Select the number to put in the memory
Turn the Control knob.
4
Determine the number to put in the memory
Press the Control knob.
5
Allow the determined number to take effect
Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNC] button.
⁄
• Only the channel number is stored. Category information
is not stored.
• This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button for at least 2 seconds.

Preset Tuning

Recalling the channels in the memory.
1
Enter Preset Tuning Select mode
Turn the Control knob.
A list is displayed.
2
Select a desired station in the memory
Turn the Control knob.
3
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
⁄
• This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button.
27
|
English