G-Analyzer Operation; G-Analyzer Control; G-Analyzer Vehicle Setup - Kenwood eXcelon KDC-X792 Instruction Manual

Function of KDC-X792

G-Analyzer Operation

G-Analyzer Control

You can adjust following G-Analyzer Control items ;
Item Setting/ Page
> "GMENU" G- Graphic/ Downloaded
G-Graphic*
G-Counter*
> "GMA" > "STOP. (page 13)
W"
> "GMA" > "HP" (page 14)
> "GMA" > "RESET" (page 14)
> "GMA" > "LEVEL" Level1 – 3*
> "GMA" > "CAL"* (page 13)
> "GMA" > "HP (page 12)
SET" *
* Can be set in standby state.
* 1 G-Graphic can be switched to customized pictures. Refer
to <Picture downloading> (page 21).
* 2 The value of G-Meter display and G-Counter display can
be reset by <G-Analyzer Reset> (page 14).
3
* Calibrating G-Point. Setting the level according to the
kinds of vehicles. In the case of driving situations calling
for few accelerations, set the G-Point up to "Level1". In
the case of frequent accelerations, set it up to "Level3".
1
Enter Display Control mode (In Display Type F)
Select "DISP".
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Enter G-Analyzer item mode
Turn the Control knob or push it towards left
or right.
Press the Control knob.
3
Select the G-Analyzer item you want to set
Turn the Control knob or push it towards left
or right.
4
Exit G-Analyzer item mode
Press the Control knob.
12
|
KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U
Setting overview
G-Analyzer display
1 / G-Meter* 2 / Selection
2
G-Analyzer Stop Watch
G-Analyzer Horsepower
Analysis
G-Analyzer Reset
3
G-Counter Level seting
G-Analyzer Calibration
setup

G-Analyzer vehicle setup

In Standby mode
G-Analyzer Vehicle Setup
Enter vehicle weight or class to calculate
horsepower.
1
Enter G-Analyzer vehicle weight setup
mode (In Display Type F)
Select "DISP" > "GMA" > "HP SET" > "WEIGHT".
For how to select Function Control item, refer to
<Function Control> (page 6).
"WEIGHT INPUT" is displayed.
2
Enter weight input
Operation type
Select the weight numbers
Select the digits to enter
3
Exit G-Analyzer vehicle wight setup mode
Press the Control knob.
4
Enter G-Analyzer vehicle class setup mode
Select "DISP" > "GMA" > "HP SET" > "CLASS".
"CLASS SELECT" is displayed.
5
Select vehicle class
Turn the Control knob.
"Mid Size"/ "Full Size"/ "SUV"/ "Van/ Mini-Van"/
"Pickup Truck"/ "Sporty"/ "Compact"
6
Exit G-Analyzer vehicle class setup mode
Press the Control knob.
Operation
Turn the Control knob.
Push the Control knob towards right
or left.