Octane Fitness Q35 Assembly Manual
Hide thumbs
Also See for Q35:
- Operation manual (48 pages) ,
- Service manual (46 pages) ,
- Product safety information (8 pages)
Advertisement
Table of Contents
- 1 Assembly Instructions
- 2 Personal Record Keeping
- 3 Q 35 Contents
- 4 The Octane Fitness Base Box Contains the Following
- 5 Hardware Pack (J) Includes
- 6 The Q35 Power Supply Box Contains the Following
- 7 Attach Pedal Lever
- 8 Install Console Mast
- 9 Attach Arms
- 10 Place Top Cover
- 11 Mount the Console to the Console Mast
- 12 Install Mast Boot
- 13 Install Access Panel
- 14 Adjust Levelers
- 15 Plug in Product
- 16 Moving the Product
- Download this manual
Advertisement
Table of Contents
Related Manuals for Octane Fitness Q35
Summary of Contents for Octane Fitness Q35
- Page 3 __ __ __ __ __ __ __ __ __ __ __ __ __ __ If you have any additional questions or need additional assistance in assembly, please contact your local service provider or Octane Fitness Customer Service at 1.888.OCTANE4 ext. 1. You may also visit us on the web at www.octanefitness.com.
- Page 4 Q 3 5 c o n t e n t s The octane Fitness base box contains the following: tools required: A) 1 - Octane Fitness cross trainer base • Phillips screwdriver B) 1 - Console and mast* • 17mm wrench or adjustable wrench C) 1 - Top cover •...
- Page 5 (for moving handlebar) L) 4 - Phillips screws (for mounting top shroud and access panel) M) 1 - Cable tie (for securing excess cable) The Q35 Power supply box contains the following: 1) 1 - Power supply 2) 1 - Information packet...
- Page 6 1. Attach pedal lever a. Remove bolt from 3-pivot link. b. Place right pedal lever (E) through leg slot in rear shroud and attach it to the 3-pivot link. Check to see that the rollers are seated and properly aligned on the rails before securing the pedal lever.
- Page 7 4. Place top cover a Place top cover (C) on top of main housing. Make sure the steel bracket on the front of the top cover clips on to the front of the main frame. b. Secure the top cover to the frame using 2 Phillips screws (L). 5.
- Page 8 Tighten the leveler nut against the frame for each leveler. Note: If you move your Q35, you may need to adjust the levelers to make sure your product is level with the floor. If the unit is not level, it may not function...
- Page 9 The Q35 features transport wheels on the front of the unit. Be careful when moving from one surface to another, such as hardwood floor to carpet.
- Page 10 n o t e s...
- Page 11 n o t e s...
- Page 12 © 2008 Octane Fitness, LLC ™ . All rights reserved. Octane Fitness, DedicatedLogic, Fuel Your Life, HeartLogic, Now-Zone and X-Mode are registered trademarks of Octane Fitness. Any use of these trademarks, without the express written consent of Octane Fitness, is forbidden.
Need help?
Do you have a question about the Q35 and is the answer not in the manual?
Questions and answers
Where is the port to plug in the power adapter on the Q35 Octane elliptical machine?
The context does not provide specific information about the exact location of the power adapter port on the Octane Fitness Q35 elliptical machine.
This answer is automatically generated