Mitsubishi Electric 1786FD2 Service Manual page 43

MEA 1786FD2 CRT Monitor Service Guide
Detailed Timing:
Vert: 50 - 120 Hz
Horz: 30 - 86 KHz
Clk: 150 MHz
<-x-Detailed Timing Descriptions-x->
Extension Flag:
Checksum:
************************** EDID Test Report **************************
Congratulations - This Monitor has Passed the EDID Test
**********************************************************************
End of EDID Test Log
EDID Test Log file closed 08/09/00 - 08:34:46
Table 5 - TCO 99 Spec
A. Ecology
1 General Criteria
1.1 Manufacturing Processes
1.1.1 Ozone Depleting Substances:
* PCB and any Process shall not use any ozone depleting substance.
1.1.2 Chlorinated Solvent:
* PCB and any Process shall not use any Chlorinated Solvent substance.
1.2 Environmental Hazards
1.2.1 Mercury and Cadmium in Electronic Components:
* None of electronic components contain any mercury or cadmium.
1.2.2 Flame Retardants in Plastic Components:
* Plastic > 25g shall not contain retardants of organically bound Chloride or Bromide.
1.3 Preparation for Recycling:
1.3.1 Labelling of Plastic:
* Plastic > 25g shall be labelled in accordance with ISO11469
1.3.2 Variety of Plastic:
* Plastic >100g shall be made from the same type of plastic material
1.3.3 Painting of Plastic:
* Plastic > 25g shall not be having paint weight >1% of plastic weight.
* Mould decoration (IMD) is not allowed
* All paints, lacquers, vanishes or colour additives used shall be declared by the type and mount.
FD (Monitor limits)
00
AA
Engineering Specification
40