Setting The From Address - Konica Minolta bizhub C450 Network Scanner Operations

1
Note
The destination can also be entered before scanning. This is called "di-
rect input". For details, refer to "Entering the addresses directly" on
page 2-18.
!
Detail
For details on registering destinations and specifying settings, refer to the
sections listed below.
"Registering abbreviated destinations" on page 3-9
"Registering group destinations" on page 3-23

Setting the From address

To perform scan to e-mail, the From address must be registered. The From
address is the address that indicates the sender when data is sent. Normally,
it is recommended that the e-mail address of administrator registration be
used.
If the e-mail address of administrator registration is not specified, the sender
e-mail address must be entered for each scan to e-mail operation. Note that
scan to e-mail is not possible if the From address is not entered.
1-10
Before using the scan functions
C450