Transferring Files; Section 8 Transferring Files - NEC Xen IPK Installation Manual

Xen IPK Xen Mail CTI Installation Guide
S 8
E C T I O N
T
RANSFERRING FILES
Remote Access
You can use a remote access connection to transfer a file or group of files
between the support computer and voice messaging system. Files
transferred between the support computer and the voice messaging system
are copied (not moved).
To transfer files, perform the procedure, "To transfer files between the voice
messaging system and support computer."
To customise the remote access file transfer settings, perform the
procedure, "To change file transfer option settings." You can change the
following default file transfer settings on the support computer:
• "Compression," which is set to "On" by default to automatically compress files
for transfer.
• "Overwrite," which is set to "Verify" and "Always" by default to confirm the trans-
fer in the event that the file transfer would replace an existing file.
• "Full view," which is set to "Off" by default to display complete file information on
both directory panels. When the option is set to "Off," only the file name and size
are displayed.
To transfer files between the voice messaging system and support
computer
1 Establish a remote access connection with the voice messaging system.
2 From the CoSession Remote Viewer Control Center window, select "File
Transfer."
3 From the File Transfer window, select the drive and directory in the
source directory which contains the file(s) that you want to transfer. This
is in either the local directory (support computer) or the host directory
(voice messaging system).
4 From the source directory, select the file(s) that you want to transfer.
5 Confirm your selection and choose "Transfer." If a message is displayed
indicating that you have "Too many bytes selected to transfer," ignore it
by choosing "OK."
6 When the transfer is complete, choose "Close."
To change file transfer option settings
1 On the support computer, from the CoSession Remote Viewer Control
Center window, choose "File transfer."
2 From the Options menu, change the desired settings.
Chapter 3 - 37