Pre-Filter Cleaning - Kenmore 1!6O31040 Use And Care Manual

I PRE-FILTER CLEANING
The pre-filter is located inside the dust
cup+ Check the pre-filter frequently and
clean when dirty,
1. Remove the dust cup as outlined in the
DUST CUP CLEANING section.
NOTE= Make sure dust cup is free of
debris before opening,
2. Rotate dust cup lid assembly counter-
clockwise as indicated on the lid and lift
off°
LOCKED
(For Use)
UNLOCKED
(Far Cleantng)
3, Clean pre-filter
by gently tapping L_ _
over a trash _\
container+ Tap on _ _---Pre-FIIler
several sides to
ensure best !"_!_B_
cleaning+
if necessary, rinse '_---cuprgUs
with cold water
only, DO NOT use
detergent or
soap. Allow parts
to dry 2.4 hours
before putting
back into vacuum
cleaner+,
DO NOT wash in the dishwasher.
DO NOT install damp,
4o Replace the lower portion of the dust
cup by altgning marks as shown,
UNLOCKED (For Cleaning)°
5+ Rotate while pressing downward until
marks align as shown_ LOCKED (For Use),
6, Replace the dust cup.
19