Side & Rear Connections - Pioneer DDJ-WeGO3 Operation Manual

Virtualdj 8

Hide thumbs Also See for DDJ-WeGO3:

Table of Contents

C. Side & Rear connections

26. PHONES SOCKET. Connect your

1/4" or 1/8" headphones to this

output

for

cueing

monitoring.

27. DC-IN: Connect the supplied AC Adaptor. Use the On/Off/Standby button at the top

panel to turn the unit on/off.

28. USB. This USB connection sends and receives audio and control information from a

connected computer.

29. IOS-DEVICE. Connect your i-Phone or i-Pad (used by other iOS applications – not

used by VirtualDJ)

30. MASTER OUTPUT (RCA): Use standard RCA cables to connect this output to a

speaker or amplifier system. The level of this output is controlled by the Master knob

on the top panel.

31. MIC INPUT. Connect a 1/4" microphone to this input. This input's audio signal is

routed directly to the Master Output of the DDJ-WeGO3 and its level is controlled by

the MIC VOL knob at the top panel.

VirtualDJ 8 – Pioneer DDJ-WeGO3

and

mix

DDJ-WeGO3 rear connections

DDJ-WeGO3 side connections

Table of Contents