Decks - Pioneer DDJ-WeGO3 Operation Manual

B. Decks
13. PLAY: Plays-Pauses the track.
14. CUE: If the track is playing, pauses
and goes to the last cue point. If the
track is paused, sets the current
position as cue point, and previews
the cue as long as the button is
pressed.
If SHIFT is pressed, it jumps to the
beginning of the track.
15. JOG: Touch sensitive platter for
scratch, bend,
parameter control.
Use the touch (top) area of the Jog to
scratch the track and the outer part
to bend (temporary speed up/down).
The Jog can operate also only in
Bend mode if the VINYL mode is
disabled from the VirtualDJ GUI.
Hold SHIFT down and then use the
Jog to fast search through the track.
The Jog can also control the Effect parameters of the triggered Effects. See 20, 21
and 22.
16. SYNC: Syncs the deck with the opposite Deck (will match BPM value and Beatgrid if
tracks are playing).
Hold SHIFT down and then use this button to beat tap (manually set the tempo of
the track if calculated incorrectly by VirtualDJ)
17. PITCH: Adjusts the tempo of the track. A different pitch range can be selected from
the VirtualDJ GUI.
18. LOOP HALF. Use this button to half the size of the Loop in beats.
19. LOOP. Use this button to trigger the selected Loop and use the same button to
exit.
Hold SHIFT down and then use this button to create a manual loop. On first press, a
Loop In (Entry) point will be set and the LOOP IN button of the GUI will be lit. On 2
press, a Loop Out (Exit) point will be set and the manual loop will be enabled. Press
this button again (3
20. LOOP DOUBLE. Use this button to double the size of the Loop in beats.
VirtualDJ 8 – Pioneer DDJ-WeGO3
seek or Effect
rd
time) to exit the loop.
Deck Controls
nd
7