Samsung iDCS 500 General Description Manual page 52

LAN INTERFACE
The iDCS 500 LAN card provides a 10/100 base T Ethernet interface for connection
to a data network. This interface allows a high speed connection for PC program-
ming across an IP network. This interface also allows the system software to be
uploaded to the SmartMedia card via the PCMMC program.
LEAST COST ROUTING
Least Cost Routing (LCR) is the ability to automatically select the most cost effec-
tive central office route for the outside number dialed by any station. The iDCS 500
LCR program includes the following features:
Option to use or not use LCR or a tenant basis
!
Programmable LCR access code
!
Digit analysis table 1000 entries each with ten digits for a iDCS 500-M system
!
and 2000 entries each with ten digits for a iDCS 500-L system.
Routing by time of day and day of week (4 time bands per day)
!
Routing according to individual station class
!
Modify digits table 100 entries for an M system and 200 entries for an L system
!
Flexible trunk group advance timer
!
Option to use or not use trunk group advance warning tones
!
LIVE SYSTEM PROGRAMMING
The system can be programmed from any display keyset or personal computer
without interrupting normal system operation. There are 3 levels of programming:
technician, customer and station. The technician level has access to all programs
and can allow the customer access to system programs as needed. Technician
and customer access are controlled by different security passcodes. Programming
from a PC requires the PCMMC program. The system can also be programmed
remotely via an optional modem card or over the internet via the LAN card.
MEET ME PAGE AND ANSWER
After a user makes a Meet Me Page, the user may remain off-hook to allow the
paged party to meet the user for a private conversation.
MEMORY PROTECTION
In the event that power is lost to the system, all customer data contained in memory
is retained by the use of a "super capacitor" for approximately 7 days. Additionally,
the Smart Media card may be used to store the system database. The PCMMC
computer program may be used to produce a backup copy of the customer data.
MESSAGE WAITING INDICATIONS
When calling a station and receiving a busy signal or the no answer condition, the
caller can leave an indication that a message is waiting. The message button will
flash red at the messaged keyset. A single line phone connected to a 16MWSLI or
8MWSLI will have a message light otherwise it will receive a distinctive message
waiting dial tone. Five message waiting indications can be left at any station.
4.18