What you can do
This unit supports wired LAN and wireless LAN enabling the network functions as below.
<WEB Control> (See page 19)
The following operations are possible when using WebBrowser.
•
Setting and adjusting the Display
•
Displaying the Display status
<PJLink> (See page 36)
Compatible with PJLink Class 1. The following operations can be performed from a computer when PJLink protocol
is used.
•
Setting the Display
•
Querying the Display status
<Command control>
Network function of the unit can control the unit in the same way as serial control from a network.
Supported commands
Commands used in the serial control are supported. (See "Operating Instructions, Display Operations")
• When using [WEB Control], [PJLink] and [Command control], enable LAN in [Control I/F Select] and [DIGITAL LINK
mode] in the [Network Settings] menu, and set [WEB Control] to [On]. (See pages 19 and 22)
• When using [WEB Control] wirelessly, enable wireless LAN in [Wireless LAN], and set [WEB Control] to [On].
(See pages 14 to 15)
●
Wireless Manager (Windows/Mac)
Software for sending the computer screen via wireless/wired LAN.
To use this function, a specialized software is required. Please install this software from the supplied CD-ROM.
This unit does not support the following functions.
Virtual remote control function
USB display function
●
Wireless Display for iOS (Panasonic Wireless Projector for iOS)
Software for sending PDF fi les/JPEG images etc. saved in an iPad/iPhone/iPod touch to this unit via wireless
LAN (WiFi).
For more information, see the website below. (Wireless Display for iOS)
http://panasonic.net/prodisplays/download/software/index.html
6