Panasonic TH-80OLFB70U Operating Instructions Manual page 4

Touch screen lcd display network operations
Table of Contents

Advertisement

Read this fi rst!
LCD Display
Declaration of Conformity (DoC)
"Hereby, Panasonic Corporation declares that this Display is in compliance with the essential
requirements and other relevant provisions of the Directive 1999/5/EC."
If you want to get a copy of the original DoC of this Display, please visit the following website:
http://www.doc.panasonic.de
Authorized Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
This Display is intended to be used in the following countries.
Albania, Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Italy, Iceland, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey, United Kingdom
The wireless LAN feature of this Display shall exclusively be used inside buildings.
About built-in wireless LAN
CAUTION:
Be aware of the following limits before using the Wireless LAN Module.
● To use the Wireless LAN Module, an access point needs to be obtained.
● Do not use the Wireless LAN Module to connect to any wireless network (SSID*) for which you do not have
usage rights. Such networks may be listed as a result of searches. However, using them may be regarded as
illegal access.
*SSID is a name for identifying a particular wireless network for transmission.
● Do not subject the Wireless LAN Module to high temperatures, direct sunlight or moisture.
● Do not bend, or subject the Wireless LAN Module to strong impacts.
● Do not disassemble or alter the Wireless LAN Module in any way.
● Do not attempt to install the Wireless LAN Module in any incompatible device.
● Do not remove the Wireless LAN Module from the host product during operations.
● Data transmitted and received over radio waves may be intercepted and monitored.
● To avoid malfunctions caused by radio wave interface, keep the host product away from the devices such as
other wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the
Wireless LAN Module.
● When noises occur due to the static electricity, etc., the host product might stop operating for the protection of
the devices. In this case, turn the host product Off with Mains power On / Off switch, then turn it On again.
● Depending on the area, this Wireless LAN Module may not be available.
4

Advertisement

Table of Contents
loading

Table of Contents