Reset To Default - THOMSON ST2030 SIP Administrator's Manual

Reboot
Activate
Commit
Version
Info
sip show reg
Ping

Reset to default

Use the following procedure to reset the phone to factory default settings
Commands
sys set rel 0
ffs format
ffs commit
ffs commit
flash clean nmm
reboot immediate
ST2030s SIP Administrator Guide v3.0
tftp2 putfile X.X.X.X filename [f/F]
[TFTP server should be ready
and select the corresponding
directory]
Trigger phone reboot
Enable services
Save settings
Show boot, dsp and FW version
Show phone info
Show registrar info
Ping the specified Host
ping <X.X.X.X> [-t|-n <Count>]
Description
Reset to default
ST2030s VoIP Business Phone
[administrator]# Reboot now
[administrator]# Activate
[administrator]# commit
[administrator]# Version
[administrator]# info
[administrator]# sip show reg
[administrator]# ping 192.168.1.3
Example
[administrator]# sys set rel 0
[administrator]# ffs format
[administrator]# ffs commit
[administrator]# ffs commit
[administrator]# flash clean nmm
[administrator]# reboot immediate
Page 290 of 308