Check That The Ip Address Is Set Properly; Reset To Default - THOMSON ST2030 SIP User Manual

Check that the IP address is set properly

menu
1. Press
2. Choose User
Navigator keys
3. Use the
4. Press Select
5. The IP address is displayed
Once you know the IP address of the ST2030, you can start to configure the phone using
its friendly web interface.

Reset to default

In order to reset the phone to its default configuration values (including passwords),
perform the following actions:
1. Unplug the phone from its power source
2. Maintain the Mute and Headset keys pressed
3. Without releasing the Mute and Headset keys, plug back the phone to
its power source
4. ST2030 will prompt "
5. The ST2030 is now reset to its default configuration values.
key
softkeys
with
to scroll down the menu to
softkey
Reset to default !!!
Information
"