Installing The Wheels; Removing The Wheels - Thule Glide Instructions Manual

3.4 InStallInG the WheelS

1
A. Press and hold the wheel release button on the
wheel. (See image 1)
B. Insert the wheel axle into the carrier axle.
C. Release the wheel release button.
D. Press the wheel fully into the carrier axle.
E. Verify that the wheel is securely attached to the
carrier by giving it a sharp pull.
F. Repeat for the other wheel.
G. Using a tire pressure gauge check the air pressure
in each tire. The minimum recommended tire
pressure is 20 psi (1.4 bar) and the maximum is 25
psi (1.7 bar).If air pressure is too low in either one of
the tires fill them up using a bicycle tire pump.
10

3.5 removInG the WheelS

2
A. Press and hold the wheel release button on a wheel.
(See image 2)
B. Pull the wheel out of the carrier axle.
C. Repeat for the other wheel.
WARNING
Before each journey make sure that
both of the wheels are securely locked
in the carrier axle.
51100988 - A