Cold Boot - Symbol PDT 3100 Series Product Reference Manual

PDT 3100 Series Product Reference Guide

Cold Boot

A cold boot fully resets the system and clears memory, including the RAM disk. Any
programs and data stored in memory or on the RAM disk are deleted. Nonvolatile memory
(NVM, the Application EEPROM) is not affected.
This procedure erases all data and programs residing in dynamic memory
and RAM Disk. All contents of the RAM disk are lost.
To perform a cold boot:
21-Key Terminal
1. Power off the terminal.
2. Press and hold <UpArrow>, <4>, and <ENTER>.
3. Press and release <I/O>.
4. Release <UpArrow>, <4>, and <ENTER>.
35-Key Terminal
1. Power off the terminal.
2. Press and hold <Space>, <Func>, and <UpArrow>.
3. Press and release <PWR>.
4. Release <Space>, <Func>, and <UpArrow>.
46-Key Terminal
1. Power off the terminal.
2. Press and hold <A>, <B>, and <D>.
3. Press and release <PWR>.
4. Release <A>, <B>, and <D>.
The terminal displays a copyright message, amount of RAM, and expanded memory. Other
messages are displayed as well, depending on the system configuration.
4-6
Caution