Ean Zero Extend - Philips Pocket Memo DPM8500 Configuration Manual

Convert UPC-E1 to UPC-A
Parameter # 26h
Convert UPC-E1 to UPC-A
Enable this parameter to convert UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission. After
Parameter # 26h
conversion, data follows UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).
Enable this parameter to convert UPC-E1 (zero suppressed) decoded data to UPC-A format before transmission. After conversion, data follows
UPC-A format and is affected by UPC-A programming selections (e.g., Preamble, Check Digit).
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E1 (zero suppressed) decoded data.
Scan DO NOT CONVERT UPC-E TO UPC-A to transmit UPC-E1 (zero suppressed) decoded data.
4 - 26 SE655 Decoded Linear Imaging Engine

EAN Zero Extend

Parameter # 27h
EAN Zero Extend
When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in format to
EAN-13 symbols. Parameter # 27h
When enabled, this parameter adds five leading zeros to decoded EAN-8 symbols to make them compatible in format to EAN-13 symbols.
Disable this parameter to transmit EAN-8 symbols as is.
Disable this parameter to transmit EAN-8 symbols as is.
Barcode scanner configuration guide
Convert UPC-E1 to UPC-A (Enable)
(01h)
*
Do Not Convert UPC-E1 to UPC-A (Disable)
(00h)
Enable EAN Zero Extend
(01h)
*Disable EAN Zero Extend
(00h)
19