Panasonic KT2 Instruction Manual page 32

[Auxiliary function setting mode 1]
Indication
PV/SV indication
Set value lock
Sensor correction
Communication protocol
Instrument number
Communication speed
[Auxiliary function setting mode 2]
Indication
Input type
Scaling high limit value
Scaling low limit value
Decimal point place
PV filter time constant
OUT1 (Heating) high limit
OUT1 (Heating) low limit
OUT1 (Heating) ON/OFF action hysteresis
EV1 output
EV2 output
Overlap band/Dead band
OUT2 (Cooling) ON/OFF action hysteresis
Alarm 1 (A1) type
Alarm 2 (A2) type
Alarm 1 (A1) hysteresis
Alarm 2 (A2) hysteresis
A1 action delayed timer
A2 action delayed timer
Alarm HOLD function
Delay action type
Delay time
Direct (Cooling)/Reverse (Heating) control
AT bias
Setting item not used
OUT/OFF key function
Step time unit
DI (Digital input) function
Output status selection when input abnormal
Controller/Converter function
Panasonic Industrial Devices SUNX Co., Ltd.
http://panasonic.net/id/pidsx/global
Overseas Sales Division (Head Office)
2431-1 Ushiyama-cho, Kasugai-shi, Aichi, 486-0901, Japan
Phone: +81-568-33-7861 FAX: +81-568-33-8591
About our sale network, please visit our website.
PRINTED IN JAPAN
Pursuant to the directive 2004/108/EC, article 9(2)
Panasonic Electric Works Europe AG
Rudolf-Diesel-Ring 2 83607 Holzkirchen, Germany
This product has been developed / produced for industrial use only.
Setting item
Setting item
© Panasonic Industrial Devices SUNX Co., Ltd. 2012
Default value
PV indication
Unlock
0.0
Modbus ASCII
0
9600bps
Default value
K: -200 to 1370
1370
-200
No decimal point
0.0 seconds
100%
0%
1.0
A1 output
A2 output
0.0
1.0
No alarm action
No alarm action
1.0
1.0
0 seconds
0 seconds
Alarm Not Holding
ON delay
0 seconds
Reverse (Heating)
20
Control output OUT/OFF
Hour:Minute
SV1/SV2 external selection
Output OFF
Controller function
Data
Data
No. KT21E5 2013.05