GRAUPNER LEKI EXTRA 330SC Assembly Instructions Manual

Hide thumbs

page of 16

/ 16
Bookmarks

Quick Links

Download this manual

Order No. 9352

ASSEMBLY INSTRUCTIONS

LEKI EXTRA 330SC

RC aerobatic model for 2 LiPo cells

This model requires a HoTT radio control system

with at least four functions

GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY

Modifications reserved! No liability for printing errors!

10/2011

- 1 -

Need help?

Do you have a question about the LEKI EXTRA 330SC and is the answer not in the manual?

Questions and answers

Summary of Contents for GRAUPNER LEKI EXTRA 330SC

Page 1: Assembly Instructions
LEKI EXTRA 330SC RC aerobatic model for 2 LiPo cells This model requires a HoTT radio control system with at least four functions GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors! 10/2011 - 1 -...
Page 2 Introduction The LEKI EXTRA 330SC is a superbly manoeuvrable RC aerobatic model, and its compact dimensions make it easy to transport. The small dimensions should not mislead you into thinking that the assembly and operation of the model do not require any model aircraft experience.
Page 3 Note: If you want to do extreme flight manoeuvres, you should use the longer servo levers that are also included with the servo. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors! 10/2011...
Page 4 Insulate the connector shaft with the heat-shrink sleeves (included with Order No.7738) . Use a hair dryer to shrink the heat-shrink sleeve. Then do a test run of GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 5 GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 6 Remove the motor bonnet again, glue in the 8x8 mm chamfer strips and completely glue in the motor bulkhead from the front as well. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors! 10/2011...
Page 7 First try this procedure without any adhesive. Above all, make sure you do not use activator for the gluing process. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 8 Note: If you do not wish to fly any extreme flight manoeuvres, you should reduce the rudder deflection in accordance with the transmitter setting. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors! 10/2011...
Page 9 3x9 mm elongated hole. Glue the two plywood spacers flush with the axle, slide on the wheels, screw on the M 3 nut, and insert into the wheel cover. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 10 Note: If you value particularly agile flight characteristics, you can do without the bust of the pilot in order to save about 30 g in all-up weight. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 11 Two-page view The original LEKI EXTRA 330SC at Hahnweide 2009. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 12 Just before touch-down reduce air speed through careful use of up-elevator. Always land the model flying into GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 13 Here at GRAUPNER Modellbau, we hope you have many enjoyable flights with your new model, the LEKI EXTRA 330SC GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors! 10/2011 - 13 -...
Page 14 You will find more information on this subject in the operating instructions supplied with your radio control system. Be sure to use only those parts included in the kit, together with other genuine Graupner accessories and replacement parts as recommended expressly by us. Even if you change a single component you can no longer be sure that the system will work reliably, and such changes also invalidate your guarantee.
Page 15 Also, always switch the receiving system off first and only then the transmitter. GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY Modifications reserved! No liability for printing errors!
Page 16 If material defects or manufacturing faults should arise in a product distributed by us in the Federal Republic of Germany and purchased by a consumer (§ 13 BGB), we, Graupner GmbH & Co. KG, D-73230 Kirchheim/Teck, Germany, acknowledge the obligation to correct those defects within the limitations described below.