Toshiba Control panel module for monitor 20550 User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Telephone
  5. Control panel module for monitor 20550
  6. User manual

Toshiba Control panel module for monitor 20550 User Manual

Business phones
Hide thumbs
Table of Contents

Advertisement

Quick Links

DKT 2404-DECT
User Guide
(337) 234-2828
"Business phones that
build business"

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Control panel module for monitor 20550

Summary of Contents for Toshiba Control panel module for monitor 20550

  • Page 1 DKT 2404-DECT User Guide (337) 234-2828 “Business phones that build business”...

  • Page 2: Making A Call To Another Extension

    Making a Call to Another Extension 1. Press the TALK button or the speaker-icon button on the handset. 2. Dial the extension number of the desired party (i.e. 201). NOTE: If you walk out of range of the base station, the handset emits an error tone and Out of Range is displayed for five seconds.

  • Page 3: Out Of Range

    Redial Press the TALK or the speaker-icon button; then press the Redial button. The last number called will be dialed, and the number displays in the LCD. NOTE: Redial digit length can be up to 32 digits. CIX No Service In cases when the TALK or speaker-icon button is pushed and connection to the CIX cannot be established, or if the base station doesn't respond, the handset goes into idle mode after blinking the following message for seven seconds:...

  • Page 4: Ring Volume Settings

    • In standby mode • Battery status icon changes to battery low. • “Charge Battery” message blinks on and off on the display. To restore your battery capacity, return the handset to the charging unit. After the handset is on the charging unit for one minute the battery icon stops blinking and the battery low tone stops.

  • Page 5: Ringer Mute

    Press the + (up) button to show the next screen(s).  When the ringer volume is Off (Vibrate), the handset vibrates instead of ringing. If the handset is on the charger and a call comes in, the ringer outputs the low tone instead of vibrating.

  • Page 6: One-Touch Dialing

    One Touch Dialing The F9 – F12 buttons (bottom row of buttons on the phone) can be programmed as One Touch buttons. To Program One Touch / Flexible Button 1. Press the menu/MUTE button. The LCD shows the menu list. 2.

  • Page 7: Place A Call On Hold

    Place a Call on Hold 1. Press the Hold button. HOLD displays on the LCD. 2. To resume call, press the flashing function button. Transfer a Call  Press Cnf/Trn. Dial the extension number in which you wish to transfer the call to.
  • Page 8 206 Rue Louis XIV Lafayette, LA 70508 337-234-2828 (Office) service@uco-la.com Visit our Website for Video Tutorials: http://UniversalComOneLA.com/User-Guides/ UCOLA - 061113...

This manual is also suitable for:

Dkt 2404-dect

Table of Contents