Related Manuals for Rac RACHP133
Summary of Contents for Rac RACHP133
- Page 1 1300W Pressure Washer RACHP133 Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling advice.
-
Page 2: Technical Data
1. Technical data Rated voltage: 240V ac Frequency: 50Hz Rated input power: 1300W Protection class: Degree of protection: IPX5 Rated pressure: 7MPa Max. pressure: 10MPa Rated flow: 5.5 l/min Rated temperature: 0-40°C Max. inlet pressure: 0.7MPa Sound pressure level : LpA=75 dB(A) Sound power level: LwA=90 dB (A) - Page 3 WARNING: High pressure hoses, fittings and couplings are important for safety of the appliance. Use only hoses, fittings and couplings recommended by the manufacturer. Do not use the appliance if a supply cord or important parts of the appliance are damaged, e.g. safety devices, high pressure hoses, trigger gun.
- Page 4 3. Description 3.1 Application This high-pressure washer has been developed for domestic use only: Car, motorbike, boat, caravan, trailer, patio/drive/flagstones, woodwork, brickwork, barbecue, garden furniture, lawn mower. Only use the high-pressure washer for purposes described in this manual. The safety precautions must be observed to prevent damage to the machine, the surface to be cleaned or severe personal injuries.
-
Page 5: Before You Start Using Your Pressure Washer
4. Before you start using your 4.4 Mounting of trolley handle (models with trolley handle) pressure washer 4.4.1. Place the trolley handle on the machine. 4.4.2. Secure the handle by mounting the 2 4.1 Mounting of Spray gun holder screws. 4.1.1. -
Page 6: Operating Your Pressure Washer
5. Operating your pressure washer 5.3.1. Let the water run through the water hose before connecting it to the machine to prevent sand and dirt from penetrating the 5.1 Connection of high pressure hose machine. 5.1.1. Mount the high pressure hose on the outlet. Note: Check that the filter is fitted in the water inlet pipe and that it is not clogged up. -
Page 7: After Using Your Pressure Washer
5.5 Regulation of spray picture of Multispeed 6.2 Winding up of power cord and high nozzle pressure hose The spray picture can be regulated on the To avoid accidents, the power cord and the high Multispeed nozzle. pressure hose should always be winded carefully up around the handle. - Page 8 7.2 Cleaning of nozzle A clogging up in the nozzle causes a pump pressure which is too high. This is why cleaning is required immediately. 7.2.1. Stop the machine and disconnect the nozzle. 7.2.2. Clean the nozzle. IMPORTANT: The cleaning tool (5) should only be used when the nozzle is detached! 7.2.3.
-
Page 9: Troubleshooting
8. Trouble-shooting To avoid unnecessary disappointments, you should check the following before contacting the service organization: Symptom Cause Recommended action Machine refuses to Machine not plugged in Plug in machine start Defective socket Try another socket. Fuse has blown Replace fuse. Switch off other machines. Defective extension cord Try without the extension cord. -
Page 10: Warning Symbols
Helpline at the number above for advice. This product is not guaranteed for HIRE purposes. Produced under license for Halco Products Ltd Booths Hall, Booths Park, Chelford Road, Knutsford, Cheshire WA16 8QZ England RACHP133 - Issue 1 - R.W. 19-01-10...
Need help?
Do you have a question about the RACHP133 and is the answer not in the manual?
Questions and answers