Related Manuals for Rac RACHP221
Summary of Contents for Rac RACHP221
- Page 1 2000W Pressure Washer RACHP221 Always Read Instruction Manual Retain for Future Reference...
-
Page 2: Safety And Warning Information
SAFETY AND WARNING INFORMATION Read and retain these instructions for future reference. WARNING: Read the instructions fully before using the product for the first time. Failure to follow the instructions may result in fire, electric shock and or serious injury. We recommend the user wears safety equipment during use. -
Page 3: Component List
COMPONENTS COMPONENT LIST: 1. Handle 12b. Quick connector (Male) 2. Mains cable holder 13. Soap dispensor 3. Trigger gun holder 14. Rotary brush 4. Mains cable 15. Fixed brush 5. Wheels 16. Turbo lance 6. Mains water supply inlet 17. High pressure adjustable spray lance 7. -
Page 4: Unpacking And Assembly
UN-PACKING AND ASSEMBLY Unpack the box carefully retaining all of the packaging until you have checked the contents to the list on page 2. Your pressure washer has been factory tested. Due to this, you may find that there is a residue of water inside the unit. - Page 5 Connecting the Trigger Gun Connect the High Pressure Hose (10) to the Trigger Gun (19) and tighten lightly with a 17mm spanner (not supplied). OPERATING INSTRUCTIONS Remove the plastic protection cap from the high pressure outlet Fig 5 (9) and connect the high pressure hose (10) to high pressure outlet as shown in Fig 5.
- Page 6 OPERATING INSTRUCTIONS Connecting you pressure washer to the mains water supply. Fig 9 Connect your hose to the mains water supply as per fig 9. Always ensure you have a good water supply & that there are Mains no kinks in the hose. supply hose adaptor, not supplied.
- Page 7 OPERATING INSTRUCTIONS ADJUSTING FAN PATTERN The angle of spray coming out of the High pressure adjustable Fig 13 Narrow Stream spray lance (17) may be adjusted by rotating the nozzle. This will vary the spray pattern from a narrow high impact jet to a wide fan spray (See Fig 13).
- Page 8 Brushes Fig 15 Your RAC pressure washer is supplied with a rotary brush and a fixed brush (see fig 15). Both have soft bristles which are ideal for cleaning car bodywork, windows, etc. This is a low pressure setting. The brushes connect to the trigger gun (19).
-
Page 9: How To Avoid Damaging Surfaces
OPERATING INSTRUCTIONS HOW TO AVOID DAMAGING SURFACES Damage to cleaning surfaces occurs because the impact force of the water exceeds the durability of the surface. Never use a narrow high impact jet or a turbo/rotary nozzle on a surface that is susceptible to damage. -
Page 10: Tips For Extending The Life Of Your Pressure Washer
OPERATING INSTRUCTIONS Operation The following cleaning procedure will help you organize your cleaning task and ensure that you achieve the most beneficial results in the shortest amount of time. Remember to use the spraying/cleaning techniques previously listed. 1. Surface preparation It is important to prepare the surface that is to be cleaned. -
Page 11: Troubleshooting
Plug Fitting Note: The product is fitted with a standard UK mains outlet 3 pin plug. If a moulded plug is fitted and has to be removed take great care in disposing of the plug and severed cable, it must be destroyed to prevent engaging into a socket. - Page 12 -11-...
-
Page 13: Spare Parts
It must be understood that common sense and caution are factors, which cannot be built into any product. These factors must be supplied by the person using this product. Hilka Tools UK Ltd 1,Roebuck place, Roebuck road, Chessington, Surrey. KT9 1EU RACHP221-Issue1-20-11-13...
Need help?
Do you have a question about the RACHP221 and is the answer not in the manual?
Questions and answers