Unsolicited Heartbeat Interval; User Preferences & Miscellaneous Scanner Options - Motorola LI4278 Product Reference Manual

Hide thumbs Also See for LI4278:
Table of Contents

Advertisement

Unsolicited Heartbeat Interval

Parameter # 1118
The linear imager scanner supports sending Unsolicited Heartbeat Messages to assist in diagnostics. To
enable this feature and set the desired unsolicited heartbeat interval, scan one of the time interval bar codes
below, or scan Set Another Interval followed by four numeric bar codes from
(scan sequential numbers that correspond to the desired number of seconds).
CODES
Scan Disable Unsolicited Heartbeat Interval to turn off the feature.
The heartbeat event is sent as decode data (with no decode beep) in the form of:
MOTEVTHB:nnn
where nnn is a three digit sequence number starting at 001 and wrapping after 100.
NOTE For correct operation, you must disable Low Power Mode (see
10 seconds
(10)
Set Another Interval
USER PREFERENCES & MISCELLANEOUS SCANNER OPTIONS 5 - 23
Appendix D, NUMERIC BAR
Low Power Mode on page
1 minute
(60)
Disable Unsolicited Heartbeat Interval
(0)
5-10).

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents