Hands-Free Trigger Mode; Low Power Mode - Motorola LI4278 Product Reference Manual

5 - 10 LI4278 Product Reference Guide

Hands-Free Trigger Mode

Parameter # 630
In hands-free mode, the linear imager scanner automatically triggers when presented with a bar code. Lifting
the linear imager scanner causes it to behave according to the setting of the
5-9.
NOTE The CR0078-P cradle is required for Hands-Free mode.
If you select Disable Hands-Free Mode, the linear imager scanner behaves according to the setting of the
Hand-Held Trigger Mode
*
Enable Hands-Free Mode

Low Power Mode

Parameter # 128
If enabled, the linear imager scanner enters a low power consumption mode after Time Delay to Low Power
Mode has expired, in which the LEDs turn off in order to conserve energy and prolong the life of the scanner.
The linear imager scanner wakes when it senses a trigger pull or when the host attempts to communicate.
If disabled, power remains on after each decode attempt.
NOTE The linear imager scanner does not go into low power mode when it is seated in the cradle.
Disable Low Power Mode
regardless of whether it is hand-held or on a counter top.
(01h)
(00h)
Hand-Held Trigger Mode on page
Disable Hands-Free Mode
(00h)
*
Enable Low Power Mode
(01h)