How To Merge Playlists; Consolidating A Playlist; Generating A Continuous Timecode In A Playlist - EVS Multicam LSM Operating Manual

Issue
10.01.F
11.10.5 H
OW TO
From the VGA, it is possible to merge two playlists by copying a playlist and
pasting it to an existing playlist. The copied playlist will be added at the end
of the destination playlist.
11.10.6 C
ONSOLIDATING A
11.10.6.1 O
VERVIEW
Using the internal loop, you can record a playlist back to the server as a big
clip if you want, for example, to record the playlist effects (split screen,
target tracking, painting, etc) as regular video inside the server.
Depending on the Internal Loop Mode parameter in the setup menu, p2.3,
F1, both video and audio can be looped back into the system, or only the
video track is looped and the system keeps recording the live audio at the
sam e tim e.
11.10.6.2 H
OW TO
To consolidate a playlist using the internal loop mode, proceed as follows:
1.
2.
3.
4.
The playlist will be recorded onto the disks (Channel 1 – CAM A) as a
continuous video/audio stream .
When you exit the playlist mode, go back to LIVE record and simply jog
back, you will see the playlist recorded with all its transitions and at the
speed they were played.
11.10.7 G
ENERATING A
P
LAYLIST
11.10.7.1 O
VERVIEW
You can regenerate a continuous timecode for the whole playlist or for each
clip of a playlist. This can be useful when:
•
you do not want to have a playlist with disrupted timecodes from the
various playlist elements
•
you want to change the timecode type in the VITC or LTC timecode
106
M P
ERGE LAYLISTS
P
L B
OOP ACK A
Add the requested effects to the playlist.
Recue the playlist.
Activate the LOOP mode via the SHIFT+LOOP key.
Roll the playlist.
C
ONTINUOUS
EVS Multicam Version 10.01 – Operating Manual
LAYLIST
P
LAYLIST INTO THE
T
IMECODE IN A
EVS Broadcast Equipment SA – July 2009
S
ERVER