Advertisement
Quick Links
Important Information
Battery Replacement
The digital safe uses four AA type batteries
(supplied). The battery life is approximately one
year. If the red LED and green LED illuminate
simultaneously when the correct PIN is entered
the batteries require replacing immediately. The
battery hatch is located on the back of the door
Digital Home Safe
(see Dia 5). The battery cover (see Dia 2) can be
removed by sliding it to the left (see arrow
701-5359
marking on cover).
Dia 5
Note:
The keypad becomes inoperable when the batteries are removed.
When replacing batteries ensure that the polarity is correct.
Make a note of the battery replacement date, they should last approximately one year.
However, we recommend checking the batteries every 6 months just to make sure.
If power is removed from the safe the set PIN code will be only remain in its memory for
a possible 4 hrs,
CAUTION: The safe is not fire proof.
If faults cannot be remedied, contact the Helpline on 020 83916767
helpline@hilka.co.uk
Hilka Pro Imports
1 ROEBUCK PLACE, ROEBUCK ROAD, CHESSINGTON,SURREY KT9 1 EU
701-5359 - Issue 1 - R.W. 22-07-08
-3-
Advertisement
Related Manuals for Challenge 701-5359
Summary of Contents for Challenge 701-5359
-
Page 1: Important Information
4 hrs, CAUTION: The safe is not fire proof. If faults cannot be remedied, contact the Helpline on 020 83916767 helpline@hilka.co.uk Hilka Pro Imports 1 ROEBUCK PLACE, ROEBUCK ROAD, CHESSINGTON,SURREY KT9 1 EU 701-5359 - Issue 1 - R.W. 22-07-08... -
Page 2: Operating
Operating the Digital Home Safe Operating the Digital Home Safe Important : Please read the instructions thoroughly before beginning the set-up 4. Refit the plastic key cover and place the override keys in a safe place (NOT IN THE SAFE) for procedure.
Need help?
Do you have a question about the 701-5359 and is the answer not in the manual?
Questions and answers
code reset
To reset the code on a Challenge 701-5359 safe, follow these steps:
1. Open the safe using the current PIN or the manual override key.
2. Locate the red reset button at the back of the door.
3. Remove the white cap covering the reset button.
4. Press the red reset button once.
5. Enter the new PIN code on the keypad.
6. Press 'B' once to confirm the new PIN.
7. Replace the white cap over the reset button for security.
The new PIN code is now set.
This answer is automatically generated