Advertisement
Quick Links
OPENING SAFE WITH OVERRIDE KEY
You can use the manual override key to open the safe and reset your code. DO NOT
keep the override key in the safe.
1. To use the key, remove the lock cover on the control panel. Dia 5
2. Turn key anticlockwise, then the doorknob clockwise, and the door will open. Dia 6.
Please keep the keys in a secure place, as we do not supply replacement keys, for security
reasons.
Please make note of the safe number as this will be needed if a service call is required.
Dia 6
Dia 5
Lock Cover
1
2
3
4
5
6
7
8
9
0
Safe number on
front panel close
to the lock
SECURING YOUR SAFE
You may wish to secure your safe to a fixed part of the house.
This can be achieved by using the 4 bolts supplied. Insert
the bolts through the 4 pre-made holes on the back or
bottom of the safe (see Dia 7 & 8).
Note: When fitting the bolts ensure that the nuts are on the
inside of the safe.
BATTERY REPLACEMENT
1. The digital safe uses four AA type batteries (supplied).
If the voltage of batteries is deficient the LCD will show
"LO-BATT" and the batteries must be replaced (see Dia 9).
Please look at the environment standards for safe disposal
of batteries.
2. In case of dead batteries, either the override key or the
backup power supply can be used to open the safe.
To use the backup power supply, first fit four 1.5V AA
batteries in the box then plug in the battery backup in the
socket (see Dia 10).
If faults cannot be remedied, contact the Helpline on 020 8391 6767
Helpline@hilka.co.uk
GUARANTEE
This product is guaranteed for domestic use for a period of 12 months against faulty manufacture or materials.
This guarantee does not affect the statutory rights of the consumer. In the event of any problem occurring
please contact our Helpline at the number above for advice. This product is not guaranteed for HIRE purposes.
Manufactured On behalf of Home Retail Group
489 - 499 Avebury Boulevard,
Central Milton Keynes,
-3-
1
2
3
4
5
6
7
8
9
0
123456
Dia 7
Dia 8
1
2
3
6
7
8
1
2
3
4
5
6
7
8
9
0
Dia 10
Dia 9
MK9 2NW
701-7113 - Issue 1 - R.W. 03-12-08
4
5
9
0
Digital Home Safe
with LCD Display
701/7113
1
2
3
4
5
6
7
8
9
0
Advertisement
Related Manuals for Challenge 701/7113
Summary of Contents for Challenge 701/7113
- Page 1 Lock Cover with LCD Display Safe number on 123456 front panel close 701/7113 to the lock SECURING YOUR SAFE Dia 7 You may wish to secure your safe to a fixed part of the house. This can be achieved by using the 4 bolts supplied. Insert the bolts through the 4 pre-made holes on the back or bottom of the safe (see Dia 7 &...
- Page 2 OPERATING THE SAFE FOR THE FIRST TIME IMPORTANT Read the instructions thoroughly before using your digital safe. 1. Use the Manual override key to open the safe for the first time, remove the plastic key Keep codes in a safe place. Do not use personal information like birthdays, lock cover (Dia 1).
Need help?
Do you have a question about the 701/7113 and is the answer not in the manual?
Questions and answers
Battery Flat can’t open
If the battery is flat, you can open the Challenge 701/7113 safe using either the manual override key or the backup power supply:
1. Using the override key:
- Remove the lock cover on the control panel.
- Insert the override key.
- Turn the key anticlockwise and the doorknob clockwise to open the door.
2. Using the backup power supply:
- Insert four 1.5V AA batteries into the backup power supply.
- Plug the backup power supply into the safe’s socket.
- Use the keypad to open the safe.
This answer is automatically generated