Adding External Expansion Modules - Avaya IP Office Installation Manual

5.15 Adding External Expansion Modules

• Each external expansion module (except the WAN3 10/100) is supplied with a blue 1 meter (3'3'') expansion
interconnect cable. This cable must be used when connecting to expansion ports on the rear of a control unit.
• When connecting to expansion ports on an IP500 4-Port Expansion card, a yellow 2 meter (6'6") expansion
interconnect cable can be used in place of the standard blue cable. 4 Yellow cables are supplied with the IP500
4-Port Expansion card.
• The WAN3 10/100 module differs in that it connects via a LAN port on its front to one of the control unit's LAN
ports. This type of external expansion module is not supported by IP500 control units.
• Pre-IP Office 5.0 IP500 systems require an IP500 Upgrade Standard to Professional license to support
external expansion modules. This license is not required for IP Office 5.0+.
Installation Requirements
Installation space either on or under the existing IP Office control unit.
•
Switched power outlet socket.
•
Available EXPANSION port on the control unit.
•
Grounding Requirements
•
Functional Grounding
•
Connection of a
Recommend for all modules.
•
Connection of a functional ground is mandatory for Analog Trunk module.
•
Protective Grounding
•
Connections of a protective ground via
Mandatory for Analog trunk modules in the Republic of South Africa.
•
Mandatory for Digital Station and Phone modules connected to out of building extensions.
•
Mandatory for Digital Station V2 and Phone V2 modules.
•
Tools Required
Manager PC.
•
Tools for rack mounting
•
IP Office Installation
IP Office
External expansion modules connect to the IP Office control unit using an
expansion interconnect cable.
Objective - Connect the external expansion modules and then restart the
control unit so that the new modules are recognized.
Each module is supplied with an expansion connect cable and a
An appropriate
the ports on the front of the module must be ordered separately.
functional ground is:
surge protection equipment
(optional).
locale specific power cord
is:
IP500 Basic Installation: Adding Licences
power supply
for the power supply unit, and
15-601042 Issue 20b (16 July 2009)
unit.
cables for
Page 95