Listen To The Cd/ Audio File - Kenwood KDC-610U Instruction Manual

8. Listen to the CD/ Audio file

8-1. Playing music
Playing a disc
Open the Disc slot cover upward.
Insert a disc in the Disc slot.
When it is inserted, the source is switched
automatically and playback starts.
Close the Disc slot cover.
Playing a USB device
Connect a USB device to the USB terminal.
[1] Front USB terminal
[2] Rear USB terminal
[3] optional accessory
You can connect the iPod or USB device to either
one of the USB terminals provided at the front and
rear of this unit.
When it is connected, the source is switched
automatically and playback starts.
Selecting an audio file folder
Press [R] or [S] button.
Selecting a song (track or file)
Press [E] or [F].
Fast-forwarding or fast-backwarding a song
(track or file)
Press and hold [E] or [F].
Pause and play a song (track or file)
Press and hold [1/6].
Removing disc
Open the Disc slot cover upward.
Press [G].
Removing USB device
Press [SRC] to switch the source to a device
22
|
KDC-610U
other than USB, and then remove the USB
device.
Data contained in the USB device may be
damaged if you remove it when it is used as the
active source.
8-2. Music search
You can select the music you want to listen to from
the device or media being played now.
1
Press [1/6].
"MUSICSEARCH" appears, and the Music search
mode is selected.
2
Search for music
Audio file
Operation type Operation
Movement between folders/files Turn [Control] knob.
Automatic scrolling Press and hold [R]/[S].
To cancel, press [R]/[S].
Selection of folder/file Press [Control] knob.
Return to previous folder Press [1/6].
Return to root folder Press and hold [E].
Cancellation of Music search mode Press and hold [1/6].
- indicator: Audio file
; indicator: Folder
CD source
Operation type Operation
Movement between track Turn [Control] knob.
Selection of track Press [Control] knob.
Return to first track Press and hold [E].
Cancellation of Music search mode Press [1/6].
When two USB memories are connected
• When two USB memories are connected, you can search for
a song in both USB memories. When database information
is added using KENWOOD Music Editor (<8-9. About
"KENWOOD Music Editor Light" and "KENWOOD Music
Control"> (page 25)), you can search a song in only one
USB memory.
8-3. Skip search
(Music Editor media <8-9. About "KENWOOD Music
Editor Light" and "KENWOOD Music Control"> (page
25))
You can search for a song by skipping songs at the
set skip search ratio (the ratio of the number of
songs to skip to the total number of songs in the
selected list).
1
Press [1/6].
"MUSICSEARCH" appears, and the Music search
mode is selected.
2
Select browse item using [Control] knob.
3
Press and hold [Control] knob.
Enter the Search select mode.
4
Select "Skip Search" using [Control] knob.
5
Search for music
Operation type Operation
Movement between items Turn [Control] knob.
Skip search Press [R] or [S].
Selection of item Press [Control] knob.
Setting of skip search ratio Press [E] or [F].
Exiting from the Music search mode
Press and hold [1/6].
Skip search ratio setting
• You can also set the skip search ratio in the Function setting
mode. Refer to <8-4. Skip search ratio setting> (page 23).
8-4. Skip search ratio setting
(Music Editor media <8-9. About "KENWOOD Music
Editor Light" and "KENWOOD Music Control"> (page
25))
You can change the ratio of skip performed as
mentioned in <8-3. Skip search> (page 23).
1
Press [SRC] and select a USB ("USB") source
using [Control] knob.
Refer to <Source selection> (page 10).
2
Press [Control] knob.
Enters the Function setting mode.
3
Select "Settings" > "Skip Search" using
[Control] knob.
For how to use [Control] knob, refer to <3-3. How
to select the item> (page 9).
4
Select a ratio using [Control] knob.
Returns to the previous item.
Exiting from the Function setting mode
Press and hold [1/6].
|
English
23