setting the alarm
Press & hold the ALARM 1 or ALARM 2 BUTTON, the alarm time will ash.
Press > to set the hour and press < to set the minute.
Press the ALARM 1 or ALARM 2 BUTTON to con rm the alarm time setting.
Press < or > to select the desired alarm source: Radio or Buzzer.
Press the ALARM 1 or ALARM 2 BUTTON to complete alarm sett ing. The ALARM 1 or ALARM 2 indicator will
appear on the display.
To stop and deactivate the alarm, press the ALARM 1 or ALARM 2 BUTTON brie y. The ALARM 1 or ALARM 2
indicator will disappear on the display.
notes: Before setting the alarm, make sure that the clock is set correctly (see "Setting the clock").
To set the radio alarm, rst tune to the desired station and adjust the volume (see "Playing the radio").
The alarm is set when the unit is on power OFF mode.
snooze
When alarm is on... press the SNOOZE BUTTON to set the snooze time duration. The sound will turn off but will
automatically come on again after about 10 minutes. Each time you press the SNOOZE BUTTON, the snooze time will
change as follows:
The maximum length of the snooze time is 60 minutes. The display will show the snooze time for about 3 seconds
and then return to show the current time.
Press the SNOOZE BUTTON and the residual time will appear, press the SNOOZE BUTTON repeatedly to select the
desired snooze time setting.
notes: Once the snooze function has been activated, the user can press the SNOOZE BUTTON anytime and
the display will show the residual time
10
20
30
40
50
60
Need help?
Do you have a question about the CR220 and is the answer not in the manual?
Questions and answers
How do I adjust the snooze time on c-11?
To adjust the snooze time on the Capello CR220:
1. Press the SNOOZE BUTTON. The current snooze time will appear on the display for about 3 seconds.
2. Press the SNOOZE BUTTON repeatedly to cycle through the available snooze times: 10, 20, 30, 40, 50, and 60 minutes.
3. Stop pressing when your desired snooze time appears. The snooze time is now set.
The maximum snooze time is 60 minutes.
This answer is automatically generated