4.3. Installing a Wireless USB Adapter (Optional)
i
A wireless USB adapter is sold separately as an optional kit. Please contact UDP
Technology Ltd. to purchase a wireless USB adapter.
Note
The kit includes:
•
USB cable
•
3M Double‐coated tape
•
Wireless USB adapter
Perform the following steps to install a wireless USB adapter:
1. Connect one end of the USB cable to the camera.
2. Connect the other end of the USB cable to a wireless USB adapter.
3. Use the enclosed double‐coated tape to attach the wireless USB adapter to the desired area.
You can attach the adapter on the body (side, top, or bottom) of the camera, ceiling, or wall.
NM‐IP1100M
9