CEL Power8 workshop User Manual
  1. Manuals
  2. Brands
  3. CEL Manuals
  4. Power Tool
  5. Power8 workshop
  6. User manual

CEL Power8 workshop User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User Manual
Innovation from
C Enterprise Ltd

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Power8 workshop and is the answer not in the manual?

Questions and answers

Related Manuals for CEL Power8 workshop

Summary of Contents for CEL Power8 workshop

  • Page 1 User Manual Innovation from C Enterprise Ltd...
  • Page 2 THANK YOU Thank you for investing in a CEL power tool. The POWER workshop has been engineered and made to demanding high quality standards, ease of operations and safety have taken a major role in development. Proper care of your POWER workshop will give you years of trouble-free use.

  • Page 3: Table Of Contents

    Contents Safety Description of Symbols Getting Started General Safety Instructions Tool Use and Care - Service Power Management POWERhandle POWERhandle - Specifications and Know Your Products POWERhandle - Additional Safety Rules POWERhandle - Operating Instructions POWERhandle - Multi-Purpose Button (MPB) POWERhandle - Maintenance Charging Charging - Specifications and Know Your Products...
  • Page 4 Contents Handheld Power Tools (continue) Jigsaw Jigsaw - Specifications and Know Your Product Jigsaw - Additional Safety Rules Jigsaw - Operating Instructions Jigsaw - Maintenance Halogen Light Halogen Light - Specifications and Know Your Product Halogen Light - Operating Instructions Halogen Light - Maintenance Bench top Functions Case...
  • Page 5 Contents Bench top Functions (continue) Scroll Saw 12.1 Scroll Saw - Specifications and Know Your Product 12.2 Scroll Saw - Additional Safety Rules 12.3 Scroll Saw - Assembly 12.4 Scroll Saw - Operating Instructions 12.5 Scroll Saw - Maintenance Table Light 13.1 Specifications and Know Your Product 13.2...

  • Page 6: Description Of Symbols

    Description of Symbols The safety and International symbols and pictographs that appear on this product, in the owner’s manual and rating plate, represent important information about the product or instructions on its use. Always change the battery Wear hearing protection. pack between temperatures Wear eye protection.

  • Page 7: General Safety Instructions

    General Safety Instructions Work area Personal safety a) Stay alert, watch what you are doing and a) Keep your work area clean and well lit. Cluttered benches and dark areas can cause use common sense when operating a power accidents. tool.

  • Page 8: Tool Use And Care - Service

    Tool Use and Care - Service Tool use and care h) Only use accessories that are recommended by the manufacturer for your a) Use clamps or other practical ways to model. Accessories that may be suitable for secure and support the workpiece to a stable one tool, may become hazardous when used on platform.

  • Page 9: Powerhandle

    3. POWERhandle...

  • Page 10: Powerhandle - Specifications And Know Your Products

    POWERhandle - Specifications and Know Your Product 3.1 Specifications Know Your Product Rails Voltage: Product release latch Batteries PH01 15x1.2v 1.5Ah Ni-Cd Options: Rear soft grip PH02 15x1.2v 1.5Ah Ni-MH PH03 15x1.2v 1.7Ah Ni-Cd Battery cooling vent PH04 15x1.2v 2.6Ah Ni-MH Electronic coupling Weight: 2.2 lbs (0.95 kg)
  • Page 11 POWERhandle - Know Your Product...

  • Page 12: Powerhandle - Additional Safety Rules

    POWERhandle - Additional Safety Rules pack. Additional Safety Rules h) Do not incinerate the battery pack even if it is Battery Packs seriously damaged or can no longer hold a charge. The battery pack can explode in a fire. a) Ensure the switch is in the off position i) A small leakage of liquid from the battery before inserting the POWERhandle (battery).

  • Page 13: Powerhandle - Operating Instructions

    POWERhandle - Operating Instructions 1. To fit the POWERhandle to a product, grip one in each hand and align the rails. Push the POWERhandle forward onto the product until it ‘clicks’ and will move no further. To ensure that it is fully assembled, try to pull them apart;...

  • Page 14: Powerhandle - Multi-Purpose Button (Mpb)

    POWERhandle - Multi-Purpose Button (MBP) The MPB (Multi-Purpose-Button) will adapt its function to the requirements of the product attached to the POWERhandle. For example when the POWERhandle is connected to; The Drill/Driver: direction control The Halogen Light: on / off / flashes (press trigger) The Jigsaw and Circular Saw: safety button, pressed before the trigger is released.

  • Page 15: Charging

    4. Charging Dock and Secondary Charger (SCP)

  • Page 16: Charging - Additional Safety Rules

    Charging - Specification and Know Your Product Specifications Know Your Product 120V~240V AC 50/60Hz 35W Input: Secondary Charger Output: 18V DC 1.5A Point(SCP) Charging time: 1 Hour 1 Hour charge times are based on the LED Display 1.5Ah POWERhandle, Larger Capacity Charger Dock batteries will have longer charge times POWERhandle...

  • Page 17: Charger Dock - Operating Instructions

    Charging Dock - Operating Instructions The POWERhandle has been shipped in a low NOTE. The RED LIGHT may flash when a hot charge condition. You should charge the battery battery is attached for charging when you fully before use. press the stop button while using the product in bench mode This is normal and you can WARNING.
  • Page 18 Charging - Secondary Charger Point (SCP) As well as the main charger dock the To obtain the best life for the battery: POWER8works is fitted with a secondary Never allow the battery to completely discharge; charger point(SCP). This allows a it should be placed on charge whenever it is POWERhandle to be charged while a second noticeably running down, or the tool no longer...

  • Page 19: Drill/Driver

    5. Drill/Driver...

  • Page 20: Drill/Driver - Specifications And Know Your Product

    Drill/Driver - Specifications and Know Your Product Specifications Know Your product Variable power trigger/Stop Voltage: MPB(Direction selector/lock) No load speed: 0-350, 0-950 RPM (LIGHT) Soft grip 0-350, 0-1,250 RPM (HAMMER) Motor cooling vents T orque settings: 21 Positions (LIGHT) Keyless chuck 18+1+1 Positions (HAMMER) 2 Speed gearbox selector Max drilling capacity:...
  • Page 21 Drill/Driver - Know Your Product...

  • Page 22: Drill/Driver - Additional Safety Rules

    Drill/Driver - Additional Safety Rules h) Do not use dull or damaged bits and Additional Safety Rules accessories. Dull or damaged bits have a Cordless Drills & Drivers greater tendency to bind in the workpiece. i) When removing the bit from the tool avoid a) Hold tool by insulated gripping surfaces when contact with skin and use proper protective performing an operation where the drill bits may...

  • Page 23: Drill/Driver - Operating Instructions

    Drill/Driver - Operating Instructions Use the MPB switch on the POWERhandle to Torque Adjustment/Hammer Selection Collar select the direction of rotation, then pull the trigger. This trigger switch is an electronic By rotating the torque adjustment / hammer variable speed control which enables the user to selection collar behind the chuck, it is possible to vary the speed continuously.
  • Page 24 Drill/Driver - Operating Instructions Inserting and Removing Cutting tools Open the jaws sufficiently to remove the accessory. For Two Sleeve Chucks Hold the rear sleeve of the chuck, turn the front Drilling Metals sleeve in a direction which releases the jaws. 1) For maximum performance, use high speed For Single Sleeve Chucks steel bits for metal or steel drilling.

  • Page 25: Drill/Driver-Maintenance 5.4

    Drill/Driver - Operating Instructions Drilling wood All drilling operations 1) For maximum performance, use high speed 1) Mark off the centre of the hole using a centre steel bits for wood drilling. punch or nail. 2) Ensure that the mode selector is in normal 2) Don't force the drill, let it work at its own drilling mode.

  • Page 26: Drill/Driver - Notes

    Drill/Driver - Notes...

  • Page 27: Circular Saw

    6. Circular Saw...

  • Page 28: Circular Saw - Specifications And Know Your Product

    Circular Saw - Specifications and Know Your Product Specifications Know Your Product Power trigger/Stop Voltage: MPB (Safety lock) No load speed: 3,500 RPM Motor cooling vent ” (40mm) Cutting depth @ 0º: Hex key 1 ” (28mm) Cutting depth @ 45º: Soft grip Saw Blade Options: Handle release latch...
  • Page 29 Circular Saw - Know Your Product...

  • Page 30: Circular Saw - Additional Safety Rules

    Circular Saws - Additional Safety Rules h) Never use damaged or incorrect blade Additional Safety Rules washers or bolt. The blade washers and bolt Circular Saws were specifically designed for your saw, for optimum performance and safety of operation a) Keep hands away from cutting area and blade.
  • Page 31 Circular Saws - Additional Safety Rules b) When the blade is binding, or when Safety instructions regarding lower guard interrupting a cut for any reason, release the a) Check lower guard for proper closing before trigger and hold the saw motionless in the each use.
  • Page 32 Circular Saws - Additional Safety Rules Safety instructions regarding the saw Support the work properly. When operating the saw, use safety Never reach over the blade to remove waste equipment including safety goggles, ear or off-cuts. protection, dust mask and protective clothing Do not attempt to free a jammed blade including safety gloves.

  • Page 33: Circular Saw - Operating Instructions

    Circular Saw - Operating Instructions Switching On and Off Adjusting the Bevel Angle (Mitre Cut) This product, when combined with the WARNING: Always ensure that the saw is POWERhandle, is fitted with a safety button switched off and the POWERhandle is detached (MPB).
  • Page 34 Circular Saw - Operating Instructions 3. Start the motor by depressing the MPB and 2. Slide the fence (protractor) into the slot in the squeezing the trigger switch. sole plate. NOTE: Always let the blade reach full speed 3. Adjust the guide to the required width and (approximately 2 seconds) before you begin to secure it into the position with the fence locking cut into the workpiece.

  • Page 35: Circular Saw - Maintenance

    Circular Saw - Maintenance Changing the blade IMPORTANT. After replacing the saw blade, make sure that the blade runs freely by turning it WARNING. Always ensure that the saw is by hand. switched off and the POWERhandle is detached from the tool before making any adjustments. Re-attach the POWERhandle and run the saw under no load to check that it runs smoothly 1.
  • Page 36 Circular Saw - Notes...

  • Page 37: Jigsaw

    7. Jigsaw...

  • Page 38: Jigsaw - Specifications And Know Your Product

    Jigsaw Specifications and Know Your Product Specifications Know Your product Handle release latch Voltage: Soft grip No load speed: 0-2400 SPM Power trigger/Stop Max Cutting Capacity: MPB (Safety lock) Metal ? ” (13 mm) Motor cooling vents Wood 2” (50 mm) Blade cover Blade guide wheel Weight:...
  • Page 39 Jigsaw - Know Your Product...

  • Page 40: Jigsaw - Additional Safety Rules

    Jigsaw - Additional Safety Rules Additional Safety Rules Cordless Jigsaws Do not try and cut a curve that is too tight. This will put undue pressure on the blade When operating the saw, use safety causing it to snap. equipment including safety goggles, ear Keep hands away from cutting area and protection, dust mask and protective clothing blade.

  • Page 41: Jigsaw - Operating Instructions

    Jigsaw - Operating Instructions Switching the Jigsaw On and Off Blade Roller Guide NOTE: This product when combined with the When setting the jigsaw for angle cutting or POWERhandle is fitted with a safety button replacing the blade, set the blade roller guide. (MPB).

  • Page 42: Jigsaw - Maintenance

    Jigsaw - Maintenance Jigsaw blade fitment type: Changing the blade (Universal Type) WARNING. Always ensure that the saw is switched off and the POWERhandle is detached from the tool before making any adjustments. 1. To fit the blade, loosen the 2 hexagonal screws on the blade clamping block.

  • Page 43: Halogen Light

    8. Halogen Light...

  • Page 44: Halogen Light - Specifications And Know Your Product

    Halogen Light - Specifications and Know Your Product Specifications Know Your Product Lens Voltage: Lens bezel Bulb: 2 x 18v 0.6A Halogen Torch arm Bulb Life: Approx 300 hours Torch body Weight: 2.9lbs (1.3 kg) Air cooling vent MPB (Multi-Purpose-Button) Handle trigger (Flash Light)

  • Page 45: Halogen Light - Operating Instructions

    Halogen Light - Operating Instructions Switching the Halogen Light on and off NOTE: This product when combined with the POWERhandle is fitted with Multi-Purpose Button (MPB). 1. To turn the halogen light on, slide the MPB button to the right. 2.

  • Page 46: Halogen Light - Maintenance

    Halogen Light - Maintenance Replacing the Light Bulb Cleaning WARNING. The halogen light immediately 1. Clean the halogen light regularly. Before begins to heat up when it is being used. Please cleaning, remove the battery pack and any handle the halogen light with care especially accessories.

  • Page 47: Case

    9. Case...
  • Page 48 Case - Know Your Product 1. Vertical post hole 10. Table saw blade slot 2. Vertical post release lever 11. Scroll saw blade slot 3. Angle fence running slot 12. Case latch (closed) 4. Parallel fence measurement guide 13. Case opening handle 5.
  • Page 49 Case - Know Your Product 18. Parallel fence measurement guide Accessory box location hook 19. Future product mount 27. Optional Accessory box 20. Post storage pocket 28. Post (in storage area) 21. Rubber feet 22. Angle fence running slot 23. Steel armoured work surface 24.
  • Page 50 Case - Know Your Product 1. Product case lock 2. Internal power coupling 3. Circular saw sole plate pocket 4. Jigsaw sole plate pocket 5. Internal power coupling cable storage 6. User manual storage...
  • Page 51 Case - Know Your Product 7. Post handle 8. Protractor (Optional) 9. Table Clamp 10. Drill head 11. Jigsaw head 12. Torch head 13. Circular saw head 14.Extra POWERhandle ( Optional)
  • Page 52 Case - Post and Accessory Box Storage and Release Post Removal To remove the post from its storage area, first close the case lid and ensure that the latches are both locked. Place the case onto its front face (handle area) the post should be facing you. 1.
  • Page 53 10. Table Saw...

  • Page 54: Know Your Product

    10.1 Table Saw - Specifications and Know Your Product Specifications Saw Blade Options: Voltage: WS1-SB01 - 5 / " (136mm) No load speed: 3,500 RPM 24 tooth TCT Cutting depth @ 0º: (20mm) ~ (38mm) ” (2mm) ” ” kerf WS1-SB02 - 5½”...

  • Page 55: Table Saw - Additional Safety Rules

    Table Saw - Additional Safety Rules 10.2 Please also refer to 2.1 - General Safety Provide adequate support to the rear and sides Instructions and 6.2 - Additional Safety Rules - of the saw table for wide or long workpiece. Circular Saw before using the table saw.

  • Page 56: Table Saw - Assembly

    Table Saw - Assembly 10.3 How to mount the TABLE SAW GUARD: Warning: Remove the battery handle from the Circular Saw before assembling the TABLE SAW GUARD. If the TABLE SAW GUARD has not been installed, Hold it here then follow instructions below: 1.
  • Page 57 Table Saw - Assembly 10.3 5. Open the case and push the front of the sole plate into the pocket on the underside of the case lid. 6. Pull back the green product lock slider and rotate the rear of the circular saw into the case lid until the sole plate is against the metal work surface, release the product lock, check that it returns fully left.
  • Page 58 Table Saw - Assembly 10.3 8. Close the lid of the case and ensure that both latched are closed. WARNING the Table Saw will not work unless the lid is closed. TO INSTALL THE FENCE: If required the POST can be used as a parallel fence. The post can be assembled on to the case on both side of the saw blade.

  • Page 59: Table Saw - Operating Instructions

    Table Saw - Operating Instructions 10.4 On both edges of the case lid there are Different Type of Cutting dimension to give a guide to the cut width. When fitting the post it is important to ensure that both The Power8 Table Saw can be used for different ends of the post are the same distance from the wood cutting operations ,as straight-line cutting blade (parallel to the blade), use the dimension...
  • Page 60 Table Saw - Operating Instructions 10.4 Switching Table Saw On and Off 4. When the cut is made, turn the saw off by pressing the red button. 1. To start the saw, press the green operation button above the charger dock. 5.
  • Page 61 Table Saw - Operating Instructions 10.4 Table Saw Different Cut Types Miter Cut 1. Remove the fence 2. Adjust the protractor Cross Cut to the desired angle for you to cut into the workpiece. 3. Put the protractor Rip Cut into the groove at the front of the saw table.

  • Page 62: Table Saw - Maintenance

    Table Saw - Operating Instructions 10.4 Bevel Cut 1. Open the lid of the saw table, adjust the Table Saw-Maintenance 10.5 circular saw bevel angle by releasing the lock knob and re-tightening at the desired angle. Store the Table Saw Properly 2.

  • Page 63: Drill Press

    11. Drill Press...

  • Page 64: Drill Press - Specifications And Know Your Product

    Drill Press - Specifications & Know Your Product 11.1 Specifications Know Your product Voltage: Post No load speed: 350 RPM, 950 RPM (LIGHT) Product Lock 350 RPM, 1,250 RPM (HAMMER) Drill Lever Gear Selection Max Drilling Capacity: Height Steel 1/2” (13 mm) Wood 1 1/10”...

  • Page 65: Drill Press - Assembly

    Drill Press - Assembly 11.3 1. Remove the Post from its storage area, as described in ‘Case Post Storage’ section 9. It is not necessary to remove the lift out tool tray for the drill press function, but when the drill press is fully assembled it will become difficult to access the inside of the case.
  • Page 66 Drill Press - Assembly 11.3 4. Add your required cutting tool to the drills chuck and tighten firmly. If further height adjustment is required please refer to stage 3. 5. The post lever can be fitted to either side to allow for left or right handed use.

  • Page 67: Drill Press - Operating Instructions

    Drill Press - Operating Instructions 11.4 Switching Drill Press On and Off cutting tool on the work piece. NOTE: Ensure that all body parts are clear of NOTE: Make sure the jigsaw and circular saw the cutting tool before installing a are NOT installed onto the case lid and the POWERhandle.

  • Page 68: Drill Press - Maintenance

    Drill Press - Maintenance 11.5 Store the Drill Press Properly General Inspection WARNING. Always ensure that the drill press is Regularly check that all the fixing screws are switched off and the POWERhandle is removed tight, they may vibrate loose over time. Ensure from the charger dock before disassembling the that all vents are clear of dust, swarf and debris.

  • Page 69: Scroll Saw

    12. Scroll Saw...

  • Page 70: Scroll Saw - Additional Safety Rules

    12.1 Scroll Saw - Specification Specifications Scroll Saw Voltage: No load speed: 2400 SPM Max Cutting Capacity: Metal 3/8" (10 mm) Wood 1 ½" (40 mm) 10.2 Scroll Saw - Additional Safety Rules 12.2 Instructions when necessary. The maximum 1. Please also refer to 2.1 - General Safety blade capacity of this Scroll Saw is 90mm, and Instructions and 7.2 - Additional Safety Rules - maximum cutting for wood is 40mm.

  • Page 71: Scroll Saw - Assembly

    Scroll Saw - Assembly 12.3 1. Open Case lid and remove the all the tools and the carry tray. Take the jigsaw in your left hand and push the rear of the sole plate into the pocket on the bottom of the Case Lid. 2.
  • Page 72 Scroll Saw - Assembly 12.3 5. Close the lid. Snap shut both the case latches 6. The table clamp can be fitted to press the work piece against the work surface. First install the post into the vertical position at the highest level.

  • Page 73: Scroll Saw - Operating Instructions

    Scroll Saw - Operating Instructions 12.4 Making pocket Cuts Making Cuts CAUTION. Always ensure that the scroll saw is 1. Use the drill press or drill to bore a hole on the switched off and the POWERhandle is removed inside of the area you want to remove, close to before any adjustments.

  • Page 74: Scroll Saw - Maintenance

    Scroll Saw - Maintenance 12.5 Store the Scroll Saw Properly WARNING. Always ensure that the saw is switched off and the POWERhandle is detached from the tool before disassembling the product. 1. open case lid, slide the internal plug away from the jigsaw.

  • Page 75: Table Light

    13. Table Light...

  • Page 76: Specifications

    Table Light - Specifications 13.1 Specifications Light Head Voltage: Bulb: 2 x 18v 0.6A Halogen Post Bulb Life: Approx 300 hours On/Off POWERhandle 10.2 13.2 Table Light - Operating Instructions Warning: Do not install the circular saw or 3. Switch ON the light by pressing green button jigsaw into the lid of the case before starting the and switch OFF the light by pressing red button assemble of the table light.
  • Page 77 14. Spirit Level, Protractor Accessory Cases (Optional)
  • Page 78 Post, Protractor - Know Your Product 14.1...
  • Page 79 Post and Protractor - Know Your Product 14.1 1. Optional Protractor - Angle markings Optional Protractor - Angle release knob Optional Protractor - Angle indicator 4. Spirit level (1of3) 5. Post lock holes 6. Finger recess 7. Post hook 8. Post head release button 9.
  • Page 80 Post and Protractor - Operating Instructions 14.2 Making Shelfs and pictures Level Marking Angles...
  • Page 81 Post and Protractor - Operating Instructions 14.2 Extended Functions of the Post Extended Function of the Protractor The post is fitted with 3 spirit levels, so it can The protractor can be used to measure angles also be used as a conventional spirit level. This and mark up work.

  • Page 82: Trouble Shooting

    15 15 Trouble Shooting Table Saw Won’t switch on. Check that the table saw shield is correctly assembled 10.3.1-4 to the bottom of the circular saw before assembling it into the case. Ensure that the internal power coupling is correctly 10.3.7 assembled onto the circular saw.
  • Page 83 15 15 Trouble Shooting Check that the case lid and both latches are fully closed. 11.4 Ensure there is a CHARGED POWERhandle in the charger dock. Post won’t slide The green lever at the back of the case must be up for 11.3.2 up or down.

  • Page 85: Additional Parts And Accessories

    New Parts and Accessories Order Parts / Accessory: Part Number: POWERhandle Options: WS1-PH01 (1.5Ah Ni-Cd) WS1-PH02 (1.5Ah Ni-MH) WS1-PH03 (1.7Ah Ni-Cd) WS1-PH04 (2.6Ah Ni-MH) Table Saw Shield WS1-SS01 LIGHT Drill/Driver WS1-LD01 HAMMER Drill/Driver WS2-HD01 Work Clamp WS1-WC01 Protractor WS1-PT01 Post Lever / Push Stick WS1-PL01 Post / Fence WS1-PF01...
  • Page 86 C Enterprise Ltd C Enterprise Limited www.cel-global.com info@cel-global.com • • • China • Europe • Australia • Japan...

This manual is also suitable for:

Power8workshopPower8Ws1-ph01Ws1-ph02Ws1-ph03Ws1-ph04 ... Show all

Table of Contents

Save PDF